Braun BP2550 manual Storage and cleaning, Calibration, What to do if, Problem Reason Solution

Storage and cleaning

Clean the product with a soft, slightly damp cloth. Stains on the cuff (G) can be carefully removed with damp cloth. Do not wash or dry clean the cuff. Do not store the product in a place exposed to direct sunlight or high humidity.

Calibration

This product has been calibrated at the time of manufacture. If used according to the use instructions, periodic re-calibration is not required.

If at any time, you question the measuring accuracy, please contact a Braun Service Centre.

Manufacturing date is given by the LOT number on the back of the product. The first number after LOT represents the last digit of the year of manufacture. The next three digits give the day of the year of manufacture.

An example: LOT 2116 xx xx – this product has been manufactured on the 116th day of the year 2002.

What to do if ...

Problem		Reason	Solution
		Batteries are low.	Battery replacement required soon.
		Measurements still
		possible.
		With rechargeable
		batteries, the «battery low»
		symbol may appear earlier
		than with alkaline
		batteries.
		Batteries are flat. Memory	Insert new batteries.
		readings can be called up.
		Measurements are not
		possible.
	(flashing)
		Cuff is too loose or	Refit cuff tightly, repeat measurement
		cannot be inflated.	as shown and described under
			«Measuring».
e.g.		Error message higher	Refit cuff tightly, repeat measurement
		than 64:	as shown and described under
		Cuff is not properly fitted.	«Measuring».

10