water (e.g. a filled wash basin, bathtub or shower).
•Keep the appliance out of the reach of children.
•Before use, check whether your voltage corresponds to the volt- age printed on the transformer.
Always use the 12 V transformer, type
Description (see page 4)
ÖSoothing attachment (not with EE 1020 model)
ÜEpilator head with tweezer element
áRelease bar for epilator head à Switch
â Socket
ä Cord connector
ã 12 V transformer with plug for power socket
Underarm epilation
Use tests monitored by dermato- logists have shown that the epilator head may as well be used underarm. Be aware that this area is particularly sensitive to pain. However, the pain sensation will diminish with repeated usage. For this specific application, we would like to give the following advice:
•Before epilating, thoroughly clean under your arm to remove any deodorant residue. Carefully dry under your arms with a towel using a dabbing action to avoid skin irritations.
•Hair should not be longer than 5 mm.
•After use, apply Silk·épil cream or baby powder (don’t use alcoholic deodorants).
How to operate your Silk·épil Before starting off, make sure that the epilator head is thoroughly cleaned and disinfected. Your skin must be dry and free from grease or cream.
•Plug the cord connector into the socket and plug the transformer into an electrical outlet.
1Switching on 0 = off
1 = for gentle epilation
2 = for
2Rub your skin to lift short hairs. Apply the Silk·épil at right angles (90°) against your skin.
For best epilation results, make sure that the soothing attachment wheels always keep in contact with the skin surface. Pressing gently, guide it slowly against the direction of hair growth. Do not press too hard. On bony parts, we recommend to use a lower switch setting.
3When epilating behind the knee, keep the leg stretched out straight; when epilating under- arm, your arm should be raised up.
10
