•Before use, check whether your voltage corresponds to the volt- age printed on the transformer.
Always use the 12 V transformer, type PI-41-77 D-1.
Description (see page 4)
ÖSoothing attachment Ü Tweezer grip selector á Epilator head with
tweezer element
à Release bar for epilator head â Switch
ä Socket
ã Cord connector
å 12 V transformer with plug for power socket
Underarm and bikini line epilation Use tests monitored by dermato- logists have shown that the epilator head may as well be used underarm and at the bikini line. Be aware that this area is particularly sensitive to pain. However, the pain sensation will diminish with repeated usage.
For this specific application, we would like to give the following advice:
•Before epilating, thoroughly clean the respective area to remove residue (like deodorant). Then dry carefully with a towel using a dabbing action to avoid skin irritations.
•Hair should not be longer than 5 mm.
•After use, apply Silk·épil cream or baby powder (don’t use alcoholic deodorants).
How to operate your Silk·épil Before starting off, make sure that the epilator head is thoroughly cleaned and disinfected. Your skin must be dry and free from grease or cream.
•Plug the cord connector into the socket and plug the transformer into an electrical outlet.
1Select the tweezer grip: + full tweezer grip
for normal to thicker hair
–reduced tweezer grip for finer hair
•Switching on 0 = Off
1 = For gentle epilation
2 = For normal epilation
3 = For
2Rub your skin to lift short hairs. Apply the Silk·épil at right angles (90°) against your skin. For best epilation results, make sure that the soothing attachment wheels always keep in contact with the skin surface. Pressing gently, guide it slowly against the
direction of hair growth (see illustration 2). Underarm, this means guiding the appliance in different directions. Do not press too hard. On bony parts, we recommend to use a lower switch setting.
9
