Haier AU282XHERA Specifications, The machine is adaptive in following situation, Cautions

Cautions

All electrical repairs must be carried out by qualified electricians. Inadequate repairs may result in a major source of danger for the user of the air conditoiner.

Do not damage any parts of the air conditioner that carry refrigerant by piercing or perforating the air conditioner's tubes with sharp or pointed items, crushing or twisting any tubes, or scraping the coatings off the surfaces. If the refrigerant spurts out and gets into eyes, it may result in serious eye injuries.

Do not obstruct or cover the ventilation grille of the air conditioner. Do not put fingers or any other things into the inlet/outlet and swing louver.

Do not allow children to play with the air conditioner. In no case should children be allowed to sit on the outdoor unit.

4.The wiring method should be in line with the local wiring standard.

5.The power cable and connecting cable are self- provided. All the cables shall have got the local authentication certificate. During installation, when the connecting cables break off, it must be assured that the grounding wire is the last one to be broken off.

6.The breaker of the air conditioner should be all- pole switch; and the distance between its two contacts should be no less 3mm. Such means for disconnection must be incorporation in the fixed wiring.

7.The waste battery shall be disposed properly.

Specifications

The refrigerating circuit is leak-proof.

The machine is adaptive in following situation

1. Applicable ambient temperature range:

Indoor	Maximum:D.B/W.B	32 C/23 C
	Minimum:D.B/W.B	18 C/14 C
Cooling
Outdoor	Maximum:D.B	43 C/26 C
	Minimum:D.B	10 C/6 C
Heating Indoor	Maximum:D.B	27 C
	Minimum:D.B	20 C
Outdoor	Maximum:D.B/W.B	24 C/18 C
	Minimum:D.B/W.B	-15 C

2.If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person.

3.If the fuse on PC board is broken please change it with the type of T 3.15A /250VAC or T 25A/250VAC. Please check the circuit diagram about the fuse replaced.

2