English

Carefully read the use instructions before use.

Important

Plug your hairdryer into an alternating current (￿) outlet only and be sure that your household voltage corresponds to the voltage marked on the hairdryer.

This appliance must never be used near water (e.g. a filled wash basin, bathtub or shower). Do not allow the appliance to become wet.

When using the hairdryer in a bathroom, always unplug it after use. Even a switched-off hairdryer presents a hazard if not unplugged.

For additional protection, it is advisable to install a residual current device (RCD) with a rated residual operating current not exceeding 30 mA in the electrical circuit of your bathroom. Ask your installer for advice.

Care should be taken not to block the inlet and outlet grill when the hairdryer is switched on.

If either grill becomes blocked, the hairdryer will automati- cally cut out. After cooling for a few minutes, it will switch back on automatically.

Do not wrap the mains cord around the appliance.

Regularly check the mains cord for wear or damage, particularly where it enters the product and the plug. If you have any doubt about its condition take the appliance to your nearest Braun Service Centre for checking/repair. The mains cord of the appliance may only be replaced by an authorised Braun Service Centre. Unqualified repair work can lead to extreme hazards for the user.

This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children.

Description

1 Switch

2«satin protect™» button with light

3 Cold shot button

4 Protection filter

5 Ion switch with light

6 Concentrator nozzle

7 Diffusor attachment

Switch (1)

Two airflow and three temperature settings allow you to personalize your hairdryer for a fast and efficient, but also gentle drying.

 

Airflow

Temperature

 

II

high

high

III

I

low

medium

II

O

off

low

I

«satin protect™» Drying

By sliding up the «satin protect» button (2), you can reduce the temperature setting, thus increasing the variety of settings. «satin protect» makes drying even gentler by avoiding high temperatures. This protects the hair texture. The «satin protect» light shines when this function is activated (a).

IONTEC

IONTEC is a technology which is specifically developed to protect the health of your hair. It restores the moisture balance of your hair that usually gets lost during styling with excessive heat.

6

Page 6
Image 6
Braun HD 730 manual Description, Switch