English | How to use Braun ThermoScan |
1.
To help to ensure accurate measurements, make sure the probe tip and lens are clean and a new, clean lens filter is in place before each measure- ment.
2.
IRT 4020: Push the Start button.
IRT 4520: Push the «I/O» button.
Then wait for the ready signal beep and the ready symbol in the display.
➘ | 3. |
| |
| Fit the probe snuggly into the ear canal, then push |
| and release the Start button. |
4.
If the probe has been positioned securely into the ear canal during the complete measuring process, a long beep will signal the end of the measuring process. The thermometer detects that an accurate temperature measurement has been taken. The result is shown on the display.
If you take the temperature of another person, the «ExacTemp» light can be of help. It flashes during the measuring process as long as the probe is securely positioned, and lights up continuously when the thermometer detects that an accurate measurement has been taken.
