Braun MR 400 HC Plus manual English, Description, How to operate your handblender, Cleaning

Models: MR 400 HC Plus MR 430 HC Plus

1 22
Download 22 pages 42.05 Kb
Page 5
Image 5
English

English

Our products are engineered to meet the highest standards of quality, functionality and design.

We hope you thoroughly enjoy your new Braun appliance.

Caution

Please read the use instructions carefully and completely before using the appliance.

The blades are very sharp!

Always unplug the appliance before assembling, disassembling, cleaning or storing.

The appliance must be kept out of reach of children.

Do not hold the motor part A nor the gear attachment (D1) under running water, nor immerse them in water.

Braun electric appliances meet applicable safety standards. Repairs or the replace- ment of the mains cord must only be done by authorised service personnel. Faulty, unqualified repair work may cause consid- erable hazards to the user.

Before plugging into a socket, check whether your voltage corresponds with the voltage printed on the bottom of the appliance.

The appliance is constructed to process normal household quantities.

The mixing beaker F is not microwave- proof.

Description

AMotor part

BOn/off switch

CShaft with blade

DGear attachment (D1) for whisk (D2)

E«HC» chopper

FMixing beaker

How to operate your handblender

The handblender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing drinks and milkshakes.

1.Insert the motor part A into the shaft with blade C and turn until it locks.

2.To avoid splashing, insert the hand- blender into the vessel first, only then press switch B .

You can operate the handblender in the mixing beaker F , and just as well in any other vessel. When blending directly in the saucepan while cooking, take the pan from the stove first to protect your handblender from overheating.

Recipe example: Mayonnaise 200 – 250 ml oil

1 egg (yolk and white)

1 tbsp. lemon juice or vinegar Salt and pepper to taste

Put all ingredients into the beaker according to the a.m. order. Introduce the handblender to the base of the beaker, switch it on and keep it in this position until the oil emulsifies. Then, without switching off, slowly move it up and down until the mayonnaise is well combined.

How to operate your whisk

Use the gear attachment with whisk only for whipping cream, beating eggwhites and mixing sponges and ready-mix desserts.

1.Insert the whisk (D2) into the gear attachment (D1) until it locks.

2.Then insert the motor part A into the gear attachment (D1) until it locks.

3.Insert the whisk into the vessel and only then press switch to operate it.

For best results:

Use a wide vessel.

Only whip up to 400 ml chilled cream.

Only whip up to 4 eggwhites.

Move the whisk clockwise.

How to use your chopper attachment

The chopper is perfectly suited for chopping meat, cheese, onions, herbs, garlic, carrots, walnuts, hazelnuts, almonds, prunes etc.

Pre-cut meat, cheese, onions, garlic, carrots, chilis (see table page 3). Remove stalks and un-shell nuts.

N.B.:

Beef: before chopping, all bones, tendons and gristle should be removed.

Do not chop ice cubes or extremely hard food, such as nutmeg, coffee beans, chocolate and grains.

1.Carefully remove the plastic cover from the blade (b).

2.Caution: the blade (b) is very sharp! Always hold it by the upper plastic part. Place the blade on the centre pin of the chopper bowl (c), press it down and turn 90° until it locks. Always place the chopper bowl (c) on the anti-slip base (d).

3.Place the food in the chopper bowl.

4.Put the upper part (a) on the chopper bowl.

5.Insert the motor part A in the upper part

(a) and turn until it locks.

6.Press switch B to operate the chopper. During processing, hold the motor part with one hand and the chopper with the other.

7.First remove the motor part.

8.Then remove the upper part (a).

9.Carefully take out the blade (b).

(You may have to turn the blade slightly.)

10.Then remove the processed food from the chopper bowl. The anti-slip base also serves as an air-tight lid for the chopper bowl.

Cleaning

After use, remove the shaft with blade or the chopper. Clean the motor part A and the gear attachment (D1) with a damp cloth only. All other parts can be cleaned in the dishwasher. However, after processing very salty food, you should rinse the blades of the shaft and the chopper right away. Also, be careful not to use in your dishwasher an overdose of cleaner and decalcifier.

When processing foods with colour (e.g. carrots), the plastic parts of the appliance may become discoloured. Wipe these parts with vegetable oil before cleaning.

Subject to change without notice.

This product conforms to the European Directives EMC 89/336/EEC and Low Voltage 2006/95/EC.

Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.

5

Page 5
Image 5
Braun MR 400 HC Plus manual English, Description, How to operate your handblender, How to operate your whisk, Cleaning