Problem | Situation | Solution |
|
|
|
Machine does not produce | Coffee/water selector (Q) not in | Turn the coffee/water selector |
coffee, only hot water is coming | correct position. | (Q) to «coffee» and make sure |
out. The water signal is lit. |
| that the coffee container (A) is |
|
| firmly inserted in the machine. |
|
|
|
The water signal (F) is blinking. | Water tank (C) is empty or it is | Ensure there is enough water |
| not firmly inserted in the | in the tank (C). The signal |
| machine. | disappears when any of the cup |
|
| buttons is pressed. |
|
|
|
I need to stop the preparation | I realise that my cup is too small | Press the «stop» button (D). The |
process. How do I empty the | for my desired drink. | cup lights are blinking one after |
brewing unit (U)? |
| the other and the machine stops |
|
| immediately. Press the cup |
|
| button (K) until the brewing unit |
|
| (U) is empty. |
The water filter exchange signal | The signal is a reminder to |
(E) lights up. | change water filter. |
Change the water filter (see «Water Filter») then press the «stop» button (D) for 5 seconds to reset the signal.
All cup signals are lit. | Machine is calcified. | Descale the machine (see |
|
| «Descaling»). |
|
|
|
Coffee has spilt over the | I have spilt dry coffee over the | Coffee residue can be removed |
machine. | machine. | using a vacuum cleaner or |
|
| another dry cleaning method. |
|
|
|
All the lights are blinking. | Error detection. | Contact an authorised Braun |
|
| service centre. |
|
|
|
If you cannot find a solution to your problem, please contact Braun customer service.
Transport
The machine must be completely empty before carrying it. Never attempt to empty the machine immediately after preparation. Allow unit to cool down for 20 minutes first.
•Remove the water tank (C), the drip tray (N) and the coffee container (A).
•Carry the unit to a sink.
•Switch the coffee/water selector (Q) to the «water» position.
•Open the water filter compartment (B) and remove the water filter (L).
•Tip the machine onto its rear
•Move the machine back into its vertical position. Water will run out of the machine through the pure water pipe (O).
•Repeat these steps until no more water runs out.
This product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23/EEC.
Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
17
