Pressure Sensor

For safety and optimum brushing results, the toothbrush has a pressure control system: If too much pressure is applied, the oscillating movement of the brushhead will continue, but the pulsation will stop. There is a noticeable change in feeling and sound when the pressure sensor is activated.

Memory timer

An incorporated timer memorises the elapsed brushing time, even when the handle is briefly switched off (max.

30 seconds). After two minutes – which is the minimum recommended brushing time – the timer signals by a short stutter.

INDICATOR® brushhead

Dentists recommend that you replace any toothbrush every 3 months, since worn bristles do not remove plaque as effectively as new ones. Therefore, the brushhead is provided with INDICATOR bristles. With proper brushing twice a day for two minutes using toothpaste, the color will disappear half-way down the bristles in a 3-month period.

After use

Rinse the brushhead thoroughly under running water for several seconds with the handle switched on. Switch off the handle and take off the brushhead. Clean both parts separately under running water, then wipe them dry.

The environment

For environment reasons, your toothbrush uses a «environmentally sound» nickel-hydride rechargeable battery. The battery does not contain any poisonous heavy metals that can damage the environment.

In the interest of recycling, please do not dispose of this appliance in the household waste at the end of its useful life. Instead dispose of it at an authorized Braun Service Center or at an appropriate collection site.

8

Page 8
Image 8
Braun OC15 525 X manual Pressure Sensor, Memory timer, Indicator brushhead, After use, Environment