OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Citrus Juice Filter (cont.)
4.Insert the juice reamer into the center of the citrus juice filter with its shaft inside the central column of
the bowl. (Fig. 13)
5. Plug in the appliance.
6. | Place fruit on juice |
| reamer and hold with |
| a cupped hand. |
7. | Operate at minimum speed. |
| WARNING: Always operate the |
| juicer at minimum speed only. |
| Do not operate the citrus juicer at |
Fig. 14 | Fig. 15 |
Speed Control Dial
The food processor speed control dial has two speeds settings plus "Pulse" and "Turbo".
1 - Low
2 - High
The speed can be adjusted while the food processor is in use.
Use of the Pulse/Turbo button allows greater control over the texture of the food being processed. Use "Pulse" when the unit is in the "Off" position. Use "Turbo" when the unit is in the "On" position and you need a burst of power.
4.Now you are ready to use any of the attachments that come with the unit; i.e. the double chopping blade, dough blade, etc.
Using The Double Chopping Blade
Always disconnect unit from power source before cleaning or changing accessories.
WARNING: USE EXTREME CAUTION WHEN HANDLING THE
BLADES. THEY ARE EXTREMELY SHARP. Always remove protective bade cover(s) before using.
higher speeds. |
Slicing & Shredding Blades
CAUTION: Make sure that the unit is unplugged from the power
source and the speed control dial is in the “OFF” position before inserting or removing attachments.
1. | Place the blade of your choice on |
| the blade holder. Inserting the longer |
| tab on the side of the blade first. |
| (Fig. 14) |
2. | Press the other end of the blade until |
| it clicks into place. (Fig. 15) |
3. | Fit the processor bowl and spindle |
Fig. 16
French Fry Blade Assembly
CAUTION: Make sure that the unit is unplugged from the power
source and the speed control dial is in the “OFF” position before inserting or removing attachments.
Note: The French Fry Blade is already assembled to the blade holder. Do not try to remove it. (Fig. 17)
1. | Fit the processor bowl and spindle |
| as detailed previously. |
2. | Using the finger holes in the French |
| Fry blade holder, fit it over the |
| spindle and press firmly into place as |
Please note that the "Pulse" and "Turbo" is only intended to be used for short "bursts" of processing.
Operating the Food Processor
Setting up:
1. | CAUTION: Make sure that the unit is |
| unplugged from the power source and |
| the the Speed control dial is in the |
| "Off" position before inserting or |
| removing any attachments and before |
| cleaning. |
2. | Place the food processor bowl onto |
| the processor body. There is no need |
| to turn the bowl. (Fig. 1) |
3. | When fitted correctly, the handle will |
The double chopping blade may be used with one blade or with
two blades.
1.To use as a double blade, carefully slip the separate blade over the shaft of the main blade. (Fig. 3 & Fig. 4)
Double Main Blade Blade
as detailed on the page 4. |
4. Using the finger holes in the blade |
holder, fit it over the spindle and |
press firmly into place as indicated. |
(Fig. 16) |
WARNING: USE EXTREME |
CAUTION WHEN HANDLING |
BLADES. BLADES ARE SHARP. |
5. Fit the lid and click into place as |
described in the Setting Up section |
indicated. (Fig. 18) |
WARNING: USE EXTREME |
CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP.
4. | Fit the lid and click into place as |
| indicated in Setting Up section |
| (page 4). |
5. | Plug in the processor. |
| WARNING: USE THE FOOD |
| PUSHER TO ADD FOOD INTO THE |
| PROCESSOR BOWL THROUGH |
| THE FEEDER TUBE. |
be to the right of the assembly, and |
the ridge on the base of the bowl will |
fit into the slot at the back of the |
processor body. (Fig. 2) |
Fig. 4
Two Blades Together
2.Then insert onto the shaft of the processor bowl. Always hold the chopping blade by the upper plastic part. (Fig. 5)
(page 4). |
6. Plug in the processor. |
WARNING: USE THE FOOD |
PUSHER TO ADD FOOD INTO |
THE PROCESSOR BOWL THROUGH THE FEEDER TUBE.
Do not overload the food processor bowl. In one operation, you can process a maximum of 6 cups (1500 ml) of food.
Do not overload the bowl. In one |
operation, you can process a |
maximum 6 cups (1500 ml) of food. |
Fig. 18
Fig. 17
7
Fig. 1
Fig. 2 | Fig. 5 |
|
4