Operating Instructions
Cleaning & Maintenance Instructions
Congratulations! As the owner of a new Swivel Head Food Processor, you are about to use a very versatile and powerful kitchen appliance that will quickly become an indispensable item in your kitchen. Bravetti Platinum Pro products are engineered to meet the highest quality standards and are designed to offer the ultimate in ease of operation and convenience.
IMPORTANT INFORMATION
Please read all the following instructions carefully:
IMPORTANT
For your protection, the Swivel Head Food Processor has a double safety switch so that it cannot run unless the bowl with lid is locked in place. Do not attempt to
IMPORTANT
The swivel head will not rotate to the unlock position unless the control dial is in the “Off” position.
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Caution: Remove the protective blade guards from blades before using in the food processor.
Cleaning and Maintenance
Caution: Make sure that the unit is unplugged from the power source and the speed control dial is in the “OFF” position and press the swivel head release button before inserting or removing attachments.
•Never immerse the unit, cord or plug in water or any other liquid.
•Clean the main unit with a damp cloth only.
•Use extreme caution when cleaning the chopping blade as the blades are very sharp.
•All other parts can be cleaned in warm sudsy water using regular dishwashing liquid.
•If food has spilled over on to the main unit, use the pointy end of the spatula to clean the cracks and crevices of the base under the food processor bowl.
•The processor lid, protective blade guards,
DO NOT place these in the dishwasher.
Using the Storage Compartment
The food processor comes with a blade storage compartment.
1.Pull the storage compartment out from the back of the unit. (Fig. 17)
Fig. 17
2.Place blades into the assigned slots inside as shown below. (Fig. 18)
Note: The blades only fit in each slot one way, with face of blade facing towards the center of the blade storage compartment. The G (large fry blade, faces the rear of the storage compartment.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
2
Fig. 18
11
