Bravetti MC665H Operating Instructions Operarting IInstructions, Cleaning and Maintenance

Operating Instructions

Operarting IInstructions

Cleaning and Maintenance

The multi cooker should be cleaned thoroughly after every use:

1.Unplug unit from the wall outlet and allow to cool completely.

2.Remove the detachable cord from the main unit.

3.Do not immerse the main unit into water or other liquids.

4.Do not use abrasive cleaners, scouring pads or steel wool.

5.To wash the cooking pot, pasta/steamer insert, or the poacher/warmer; fill with hot water and let it soak. Hand wash with a sponge and mild detergent. These components are also top rack dishwasher safe.

6.Remove the steam vent and clean

all parts thoroughly and allow to air dry before replacing in unit.

7.Lift the carry handle to remove the water collector from the rear of the unit and hand wash with warm soapy water.

8.The cover and inside the main unit should be wiped down with a damp soapy cloth and then rinsed with a clear water cloth.

9.To clean the exterior of the unit, lightly wipe with a damp cloth.

10.If rice or other grains are found on the heating plate inside the main unit, they must be removed to avoid inadequate cooking. Use a damp sponge to wipe the surface of the heating plate clean. Do not use any detergent on the heating plate.

Note: Do not use metal utensils or sharp metal objects such as a knife to remove food particles, this will damage the non-stick surfaces of the unit.

Hints and Tips for Perfect Rice

•For best results when cooking rice, leave the rice settle in the unit for a few minutes before opening cover.

•Stir rice thoroughly before serving.

•To obtain a softer rice, allow the rice to soak in the cooking pot for 10-15 minutes before cooking.

•Do not keep rice warm for more than 10 hours.

•Do not use metal utensils to stir rice, wooden utensils work best for perfect tasting rice.

Using the Soup Function for Soups or Stews

Note: If using meat, see recipe section for directions on browning.

1.Plug unit into the wall outlet.

2.Fill the cooking pot with ingredients for stew or soup.

3.Press down on the cover until it clicks into place.

4.Press the function button two (2) times until the arrow on the LCD display is pointing to the soup function. (Fig. 9) The numbers “01” will flash on the LCD display. The default time for the soup function is 1 hour.

Soup Selected Fig. 9

5.If more than one hour is required, press the adjust button to change the number of hours up to a maximum of 4 hours.

6.Press the timer button to get the “:00” to flash. This means the minutes can be set for the steaming time required.

7.Press the adjust button to increase the minutes required for soups or stews. The minutes can be adjusted up to :59 minutes. Choose the cooking time required based on type of dish being prepared and amount.

8.Press the start button to begin the cooking process. The “:” (colon) on the LCD display will flash indicating that the timer is counting down.

9.When the function is complete the unit will beep. One minute later if the stop button has not been pressed the unit will switch to the keep warm function for six (6) hours.

10.Empty the water collector after each use. Allow the unit to cool completely before cleaning.

Using the Pasta Function

When using the pasta function do not go beyond the max line, in the cooking pot as the water will boil over and leak out of the pot. The maximum level of water is 1.6 qt (1.8L).

1.Place cooking pot into the unit.

2.Fill the cooking pot with the required amount of water and 1 tsp oil, salt if desired.

3.Press down on the cover until it clicks into place.

4.Plug the detachable cord into the rear of the unit then plug the cord into a grounded-type 120V AC electrical wall outlet.

5.Press the function button three (3) times until the arrow on the LCD display is pointing to the pasta function. (Fig. 10) The numbers on the LCD display will not flash.

Pasta Selected Fig. 10

6.Press the start button.

7.The unit will begin to boil the water.

8.Once the water has come to a boil the unit will beep.

9.Prepare the pasta by placing in the pasta/steamer insert. Break in half if too long for the insert.

10.To insert the handle onto the pasta/ steamer insert, squeeze the ends of the handle and slide into guides on pasta/steamer insert and release the handle ends.

11.Open the cover and carefully place the pasta/steamer insert into the cooking pot.

Caution: The water and steam are hot add the insert with extreme caution to avoid burns or injury.

12. Remove the handle from the pasta/ steamer insert.

13. Close the cover and press the adjust button to adjust the minutes required for cooking the type of pasta. The maximum time that can be set on the pasta function is 18 minutes.

14. Press the start button.

10

7

15. When the unit beeps again the pasta is ready. Press the stop button and unplug the unit.