Cutout, Tab Tab, Step | Bretford FP42ULC manual

CUTOUT 2

STEP 14

Install the pull out shelf by sliding CUTOUT 1 into TAB 1 and CUTOUT 2 into TAB 2.

CUTOUT 2

TAB 1

TAB 2

CUTOUT 1

10

Image 10

Bretford FP42ULC manual Cutout, Tab Tab, Step

Contents

FP42ULC FP42MULC PARTS LISTHARDWARE LIST FLAT PANEL CABINET CART WITH OR WITHOUT A PULL OUT SHELF AA BB STEPBRACKET TO THE INSIDE INSTALL HARDWARE TO TOP SHELF CORNER ONLY, OMIT HANDLE SIDE AA BB Slide on middle shelf Slide on bottom shelf Slide on front legs AA BB Install handle to either side of the cart using bolts GG and nuts BB Secure tube and top shelf together using screws HH and nuts HH Side Panel AA BB INSTALL HARDWARE TO EACH CORNER AA BB Rear Panel NOW TIGHTEN ALL CART CORNER HARDWARE Install door stop to bottom shelf using screws CC and nuts DD JJ KK SKIP TO STEP 15 IF YOUR CART DOES NOT HAVE A SHELF STEP CUTOUT A CUTOUT B Extend the slides to the positioning shown CUTOUT TAB TAB TOP BOTTOM CENTER MONITOR HORIZONTALLY THEN SECURE driver bit provided LL031-8691 Rev. 05.11.11 CZ