Step, Aa Bb, Bracket To The Inside | Bretford FP42ULC specification

STEP 1

Position the top shelf onto the rear legs making sure the leg brackets are to inside of the shelf. LOOSELY secure the shelf to the legs using screws (AA) and bolts (BB).

BRACKET TO THE INSIDE

These side holes are used for installing the handle. Leave one of the sides open to install the handle.

AABB

Page 2

Image 2

Bretford FP42ULC manual Step, Aa Bb, Bracket To The Inside

Contents

FP42ULC FP42MULC PARTS LISTHARDWARE LIST FLAT PANEL CABINET CART WITH OR WITHOUT A PULL OUT SHELF BRACKET TO THE INSIDE STEPAA BB INSTALL HARDWARE TO TOP SHELF CORNER ONLY, OMIT HANDLE SIDE AA BB Slide on middle shelf Slide on bottom shelf Slide on front legs AA BB Install handle to either side of the cart using bolts GG and nuts BB Secure tube and top shelf together using screws HH and nuts HH Side Panel AA BB INSTALL HARDWARE TO EACH CORNER AA BB Rear Panel NOW TIGHTEN ALL CART CORNER HARDWARE Install door stop to bottom shelf using screws CC and nuts DD JJ KK SKIP TO STEP 15 IF YOUR CART DOES NOT HAVE A SHELF STEP CUTOUT A CUTOUT B Extend the slides to the positioning shown CUTOUT TAB TAB TOP BOTTOM 031-8691 Rev. 05.11.11 CZ driver bit provided LLCENTER MONITOR HORIZONTALLY THEN SECURE