SKIP TO STEP 15 IF YOUR CART DOES NOT HAVE A SHELF
STEP 10
Attach each shelf bracket under the top shelf as shown using screws (FF).
Make sure the bracket cutouts face this way, if not the bracket will be installed upside down.
FF
STEP 11
Install the outer slide onto the shelf bracket by sliding TAB 1 into CUTOUT A and TAB 2 into CUTOUT B.
The pull out shelf should be installed opposite of the handle.
TAB 1 | TAB 2 |
|
CUTOUT A
CUTOUT B 
This tab determines where the shelf will slide out from.
Each cart bracket has additional cutouts to allow the shelf to pull out from either side of the cart.
NOTE: Some bend in the bracket is ok as the slides and shelf will take care of that once
they are installed.
8
