Step, Now Tighten All Cart Corner Hardware | Bretford FP42ULC

Side Panel

STEP 5

Position each side panel under the middle shelf and hook it’s bottom flange under the bottom shelf as shown. LOOSELY install hardware to each corner with bolts (AA) and nuts (BB). Carefully rotate cart onto it’s back and install rear panel just like side panels.

Side Panel

AA

BB

INSTALL HARDWARE TO

EACH CORNER

AA BB

Rear Panel

NOW TIGHTEN ALL CART CORNER HARDWARE

5

Image 5

Bretford FP42ULC manual Side Panel AA BB INSTALL HARDWARE TO EACH CORNER AA BB Rear Panel, Step

Contents

HARDWARE LIST PARTS LISTFP42ULC FP42MULC FLAT PANEL CABINET CART WITH OR WITHOUT A PULL OUT SHELF BRACKET TO THE INSIDE STEPAA BB Slide on middle shelf Slide on bottom shelf Slide on front legs AA BB INSTALL HARDWARE TO TOP SHELF CORNER ONLY, OMIT HANDLE SIDE AA BB Secure tube and top shelf together using screws HH and nuts HH Install handle to either side of the cart using bolts GG and nuts BB NOW TIGHTEN ALL CART CORNER HARDWARE Side Panel AA BB INSTALL HARDWARE TO EACH CORNER AA BB Rear Panel Install door stop to bottom shelf using screws CC and nuts DD JJ KK CUTOUT A CUTOUT B SKIP TO STEP 15 IF YOUR CART DOES NOT HAVE A SHELF STEP Extend the slides to the positioning shown TAB TAB CUTOUT TOP BOTTOM 031-8691 Rev. 05.11.11 CZ driver bit provided LLCENTER MONITOR HORIZONTALLY THEN SECURE