Step 6: Then place the power pack onto the rear storage area of the top shelf and push the laptops connecting lead through to the front of the shelf. Repeat until all power packs and leads are in place.
Step 7: Move to the front of the cabinet, unlock and open the front doors to reveal 8 horizontal laptop shelves. Select one of the connecting leads, previously fed through & plug it into the laptop.
Step 8: Place the laptop onto the shelf and repeat until all laptops are connecting and in place - 2 laptops per shelf.
Step 9: Feed the IEC connector end of the supplied 2m mains lead through the hole in the side of the trolley.
Step 10: Plug the mains lead into the IEC socket on the side of the timer module.
Step 11: Plug the trolley’s mains lead in to a switched wall socket and switch ON.
Switch on the unit’s own ON/OFF switch located above the mains lead input.
IMPORTANT - Ensure the wall socket switch is in the OFF position before connecting and removing the mains plug
NOTE: When the unit is first turned ON, it will automatically divert to constant charging mode. To set the 24 hour timer, refer to the steps below.
3
