CONNECTION TO THE MAINS SUPPLY
When using electrical appliances, basic safety precautions should always be followed.
!WARNING
THIS APPLIANCE MUST BE EARTHED
If this appliance is fitted with a rewirable BS1363, 13 amp plug, the fuse should be rated at 3 amps and be ASTA approved to BS1362. However if the plug is unsuitable, it should be dismantled and removed from the supply cord and an appropriate plug fitted as detailed below.
If this appliance is fitted with a moulded BS1363 13 amp plug, the fuse should be rated at 3 amps and be ASTA approved to BS1362. If the fuse in a
In the event of the plug being unsuitable, it should be changed and an appropriate plug fitted as detailed below. If you remove the plug it must not be connected to a 13 amp socket and the plug must be disposed of immediately.
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wires of the mains lead are coloured in accordance with the following code:
GREEN & YELLOW = EARTH BLUE = NEUTRAL BROWN = LIVE
The wire which is coloured GREEN & YELLOW must be connected to the terminal
in your plug which is marked with an E or by the EARTH SYMBOL 
or coloured GREENor GREEN&YELLOW.
The wire which is coloured BLUE must be connected to the terminal in your plug which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in your plug which is marked with the letter L or coloured RED.
If any other plug is used, a 3 amp fuse must be fitted either in the plug or adaptor or at the distributor board.
Plug should be BS1363/A approved
Fit a 3 Amp fuse
3 Amp 
fuse
BLUE | BROWN |
(Neutral) | (Live) |
Ensure that the outer sheath of the cable
is firmly held by the clamp
12
