USINGYOURWATERFILTER/CHILLER
For optimum enjoyment, we recommend that if your water chiller has not been used for 1 day or more, you first draw half a glass of water and dispose of it. It is possible to use the unit without power but the water will not be chilled. Remember that water is a foodstuff. Please consume filtered water within 2 days.
To empty filtered water from the system, use the plug in the base of the chiller as instructed in the storage section on page 10.
When replacing the bottom 2 litre filtered water tank, please ensure that there is no water in the inner well (illustrated below).
Inner well
If there is water present, dispense the water using the lever until the well is empty.
Should water spill from the tank it is not dangerous. Do not grasp or pull on the tank sections to move or reposition the unit.
✎NOTE
There is a risk of leakage from the split joint between the top tank and filtered water tank. This may occur if the unit is moved or disturbed when both tanks are at maximum capacity. To avoid leakage, draw off water using the lever to empty the top tank so that it does not overflow when moved.
Troubleshooting
Water is not dispensed:
•Make sure that there is water in the tank.
•Air trapped in the filter cartridge may stop water flowing into the filtered water tank. The cartridge must be immersed in cold water and agitated to removed any air bubbles before installation.
•Filter is blocked. Replace.
•Air can become trapped in the internal tank. Press the dispensing lever until clear water dispenses without any air bubbles. This may take some time.
Chiller light tuning off and on:
•The chiller light will not stay on permanently. It will cycle on and off as the temperature of the water is maintained.
7
