Breville BDC600XL /A manual Operating, Before First Use, Initial Set Up, your Breville product

OPERATING

your Breville product

BEFORE FIRST USE

BEFORE FIRST USE

•Before using the YouBrew® for the first time, ensure you have unpacked all parts and accessories before removing and safely discarding all packaging material and promotional labels. Ensure the power cord is unplugged from the power outlet.

•Wipe the exterior stainless steel housing with a soft, damp cloth. Wash the bean hopper and lid, coffee basket, gold tone filter and carafe in warm, soapy water and a soft cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface. Rinse and dry thoroughly.

INITIAL SET UP

1. Install the Bean Hopper

Position the hopper onto the machine. Turn the locking knob clockwise in the direction of the LOCK arrow until it clicks. Fill the hopper with fresh beans. We recommend always keeping the hopper full (0.5lb maximum) to ensure there are sufficient beans. However, never over-pack the hopper as this may result in the grinder jamming. Replace the hopper lid.

NOTE

For easy removal, storage and transfer of beans, the hopper can be removed by turning the locking knob counter-clockwise in the direction of the UNLOCK arrow. If you have removed the hopper, ensure it is securely reassembled back onto the machine. The safety interlock system will prevent operation if the hopper is incorrectly assembled. The LCD screen will flash ‘LOCK BEAN HOPPER’ until the issue is resolved.

2. Plug in the Power Cord

Unwind the power cord completely and insert the power plug into a grounded

110-120V power outlet. Press the POWER button. The LCD screen will illuminate.

NOTE

The coffee machine will enter POWER SAVE mode after remaining idle for

10 minutes. Press the POWER button to exit POWER SAVE mode and re-start the machine.

3. Install the Coffee Basket

For best results, we recommend pre-heating the coffee basket by running it under

hot tap water. Ensure to dry the coffee basket thoroughly, taking particular care to completely dry the chute area. Line the coffee basket with either the provided gold tone filter or a paper filter. Never use both at the same time.

a)Provided gold tone filter. When using the gold tone filter, be sure that the handle is positioned towards the hinge area of the coffee basket. If you do not, the handle may interfere with the flow of ground coffee into the gold tone filter.

HANDLE TOWARDS	ENSURE CHUTE
COFFEE BASKET HINGE	AREA IS
	COMPLETELY DRY

NOTE

The gold tone filter will allow some fine coffee grounds to fall into the coffee. This will appear as sediment in the cup or carafe. This is normal.

Only use the gold tone filter provided as others may cause the machine to overflow.

13