Breville BIA500 manual OPERATING YOUR BREVILLE Freeze & Mix, Before first use, Prepare Ingredients

OPERATING YOUR BREVILLE Freeze & Mix

Before first use

Remove and safely discard any packaging material or promotional labels before using the bowl for the first time.

Wash and dry the bowl thoroughly following the ‘Care and Cleaning’ instructions in this booklet.

Operating your Breville Freeze & Mix

Place the freezer bowl into your freezer for a minimum of 15 hours prior to making ice cream. When freezing your bowl, ensure that it is placed in the coolest part of the freezer. Adjust your freezer so that it is at the coldest setting. Then place the freezer bowl in the freezer for a minimum of 15 hours, prior to making ice cream, this will give you a faster and better end result.

NOTE

The Freezer bowl must be frozen for a minimum of 15 hours to ensure that the correct consistency of ice cream can be made.

Prepare Ingredients

Prepare the mixture and the ingredients to be used to make the ice cream or frozen desert.

NOTE

It is important to prepare all ingredients before removing the freezer bowl from the freezer. This will prevent the freezer bowl from thawing.

NOTE

If the mixture being used has been heated, ensure it has been completely cooled before placing it into the freezer bowl.

NOTE

Make sure your ice cream mixture has been refrigerated for 1-2 hours, if recipes require heating then chill mixture for 2-4 hours or overnight if time permits before churning/ freezing. This will maintain that you achieve consistent quality ice cream results every time.

Attaching the bowl

1.Place the bench mixer base on a level, dry surface such as a bench top. The mixer motor head should be in the horizontal (closed) position. Raise the mixer motor head by depressing the tilt back hinge button located on the back of the mixer motor head.

Lift the mixer motor head up until it tilts back and locks into the open position.

9