Care & cleaning
Cleaning the My K-Cup®accessory
Regular cleaning of the My K-Cup®accessory is recommended.
1.Remove the assembled My K-Cup®Holder from the Brewer by raising the Safety Locking Arm. Use caution as the My K-Cup®Holder will be hot.
2.Disassemble the My K-Cup®Holder by removing the Lid from the Holder in a counter-clockwise direction. Remove the Filter Basket from the Holder, discard the grounds.
3.Wash the Lid, Filter Basket and Holder in warm soapy water with a soft cloth, then rinse and dry thoroughly. All My K-Cup®parts are topshelf dishwasher safe.
4.Store the assembled My K-Cup®Holder in the My K-Cup®Storage compartment located on top of the Brewer.
Cleaning the water tank and lid
1.Wipe the Water Tank Lid with a soft, damp cloth then dry thoroughly. The Lid should not be put into the dishwasher.
2.Wash the Water Tank in warm soapy water with a soft cloth, then rinse and dry thoroughly. Do not dry the inside of the Tank with a cloth as lint may remain. The Water Tank should not be put into the dishwasher.
NOTE:
Rinse the Water Tank thoroughly after cleaning to ensure that no cleaners or cleaning solutions remain as they may contaminate the water supply in the Brewer.
Cleaning the water filter
Regular cleaning of the Water Filter is recommended. We suggest doing this when the Water Filter is replaced every 2 months or 60 tank refills.
1.Disassemble the Water Filter by removing the Lower Filter Holder from the Upper Filter Holder. Discard the Water Filter.
2.Wash the Upper and Lower Filter Holder in warm soapy water with a soft cloth, then rinse and dry thoroughly. Both parts are also top-shelf dishwasher safe.
NOTE:
Replace the Water Filter every 2 months, or 60 tank refills, more if you have hard water.
To order replacement Water Filters, visit www.breville.com.
We recommend removing the Water Filter if you choose not to replace the Water Filter every 2 months, as the filter may clog and affect the smell and taste of the water.
Descaling the brewer
Mineral content in water varies from place to place. Depending on the mineral content of the water in your area, calcium deposits or scale may build up in your Brewer. Scale is non-toxic, but left unattended,
it can hinder the Brewer’s performance. Descaling your Brewer helps maintain the heating element, and other internal parts of the Brewer that come in contact with water.
Care & cleaning
NOTE:
Do not use water that has been treated by a 'water softener'. The increase in sodium levels in the water can cause scaling in the brewer and hinder its performance.
The Brewer should be descaled every
3-6 months to ensure optimal performance. It is possible for calcium deposits to build up faster, making it necessary to descale more often.
This Brewer is equipped with sensors to detect when scale buildup is interfering with the performance of the Brewer. When this is detected, the LCD screen will indicate ’DESCALE’.
NOTE:
The Brewer will continue to operate even when the LCD screen indicates ‘DESCALE’.
However, if you do not descale the Brewer soon after it is displayed, continued scale build-up could damage the Brewer. If this occurs, ‘DESCALE’ will begin to flash, alerting you to the potential damage to the Brewer if you do not descale immediately.
Promptly follow these steps each time the LCD screen indicates ‘DESCALE’ to ensure the Brewer functions optimally.
1.Empty the Water Tank.
2.Pour vinegar into the Water Tank, filling up to the 'MAX' mark on the water tank viewing window.
3.Place a 12 oz. or larger ceramic cup (do not use a plastic cup) on the Drip Tray. The Drip Tray and Drip Tray Plate can be removed to accomodate taller mugs and travel mugs.
4.Select the largest brew size (11.25 oz.
serving) by pressing the 
button on the control panel.
5.Run a cleansing brew without a K-Cup®(refer to Brewing Hot Water, page 18). Pour the contents of the cup into the sink.
6.Repeat the cleansing brew process until the Water Tank is empty, pouring the contents of the cup into the sink after each cycle. Remember to raise and lower the Safety Locking Arm between each cycle so the control panel buttons illuminate.
7.Let the Brewer stand for at least 4 hours while still on.
8.Rinse the Water Tank thoroughly and fill with fresh water.
9.Place a 12 oz. or larger ceramic cup (do not use a plastic cup) on the Drip Tray.
10.Run a cleansing brew without a K-Cup®(refer to Brewing Hot Water, page 18). Pour the contents of the cup into the sink.
11.Repeat the cleansing brew process until the Water Tank is empty, pouring the contents of the cup into the sink after each cycle. You may need to perform additional rinse cycles if you notice any residual taste. Remember to raise and lower the Safety Locking Arm between each cycle so the control panel buttons illuminate.
12.Disconnect the power plug from the wall outlet for at least 15 minutes, then re-plug the power cord into the wall outlet. The machine is now ready to use.
NOTE:
If the LCD screen continues to indicate ‘DESCALE’ after completing the process, repeat the 'Descaling the Brewer' process (page 28).
