Breville BWC200 manual Care & Cleaning, For your Breville Chill Control

Care & Cleaning for YOUR BREVILLE Chill control™

CARE & CLEANING

for your Breville Chill Control™

Care & cleaning

1.Switch the appliance Off and unplug the power cord from the power outlet before cleaning.

2.Remove the lid, pre-filter tank and water from the filter tank.

3.To empty the stainless steel cooling reservoir, remove the plastic plug that separates the filtered water from the cooling reservoir.

4.Turn the appliance upside down to drain any remaining water from the cooling reservoir.

5.Wipe the inside of the filter tank and cooling reservoir with a clean, damp cloth.

6.Wash the lid, pre-filter tank and plastic plug in warm soapy water using a mild detergent and dry thoroughly.

7.Wipe exterior of appliance with a soft, damp cloth.

8.Do not immerse the base in water or any other liquid

Removable plastic plug

The Breville Chill Control™ includes a removable plastic plug that separates filtered from chilled water. As well as making the cleaning of the cooling reservoir easy, it assists in the cooling process to keep the water cool.

The plastic plug can be dismantled for cleaning. Simply squeeze the sides to release as shown below and wash with warm soapy water.

Storage

Ensure the Breville Chill Control™ is switched Off, all internal tanks are emptied of water and it is clean and dry before storing.

Stand the Breville Chill Control™ upright on the power base. Do not store anything on top.

Flush the appliance again before using again (see instructions on page 9)

NOTE

Do not use alkaline or abrasive cleaning agents, steel wool or scouring pads as these can damage the surface of the appliance.

Do not place any part of this appliance in a dishwasher.

15