TM
GE/AR80 Installation Manual
580-00519, rev A 22 of 40
4. Adjust elevation (up - down)
Figure 3-10 Elevation adjustment
1.
Loosen (2)
antenna
mounting bolts
2.
Rotate Elevation adjust
hex nut as required to set
correct elevation.
Caution: Do not try to
adjust this bolt with out first
loosening up the antenna
bolts (Step 1). Doing so
may damage the elevation
adjustment pin.
3.
Tighten all bolts
after the elevation
is set.
* For pricing and a quotation, visit MeridianMicrowave.com
* For pricing and a quotation, visit MeridianMicrowave.com