BridgeWave AR80, GE80 4 Operation of GE/AR80 & configuration of network equipment


TM
GE/AR80 Installation Manual
580-00519, rev A 33 of 40
4 Operation of GE/AR80 & configuration of network equipment
During normal operation, the following conditions should exist at the radio:
1 The power LED should be lit—solid green;
2 The fiber LED should be lit—solid green;
3 The Link Up LED should be lit—solid green; and
4 The Link Quality BER voltage normally should be 3.0-3.3v when it is not
raining.
Figure 4-1: LEDs indicating link is up and operational
The GE80 radio does not require periodic maintenance. However, each end of
the link should be periodically inspected for visible damage or excessive
accumulation of dirt on the antenna’s radome.
* For pricing and a quotation, visit MeridianMicrowave.com
* For pricing and a quotation, visit MeridianMicrowave.com