3500W Portable Generator

120 Volt AC, 20 Amp, Duplex Receptacles

Each duplex receptacle (Figure 5) is protected against overload by a push–to–reset circuit breaker.

Build a structure that will enclose three sides and the top of the generator:

1.Make sure entire muffler-side of generator is exposed. Note that your generator may appear different from that shown in Figure 6.

Figure 5 — 120 Volt, 20 Amp Duplex Receptacle

Use each receptacle to operate 120 Volt AC, single–phase, 60 Hz electrical loads requiring up to 1,750 watts

(1.75 kW) at 14.6 Amps of current. Use cord sets that are rated for 125 Volt AC loads at 15 Amps (or greater).

Figure 6 — Permanent Cold Weather Shelter

Wind

2.Ensure a minimum of two feet clearance between open side of box and nearest object.

3.Face exposed end away from wind and elements.

COLD WEATHER

OPERATION

Under certain weather conditions (temperatures below 40°F [4°C] and a high dew point), your generator may experience icing of the carburetor and/or the crankcase breather system.

4.Enclosure should hold enough heat created by the generator to prevent problems.

DANGER

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

Operate generator ONLY outdoors.

Keep at least 2 feet of clearance on all sides of generator for adequate ventilation.

DO NOT operate generator inside any building or enclosure, including the generator compartment of a recreational vehicle (RV).

Remove generator from shelter when temperature is above 40°F [4°C].

10

Page 10
Image 10
Briggs & Stratton 030208 owner manual Cold Weather Operation, Volt AC, 20 Amp, Duplex Receptacles

030208 specifications

The Briggs & Stratton 030208 is a popular and reliable model widely recognized for its efficiency, durability, and robust performance in various applications. This engine is primarily designed for portable generators, lawn mowers, pressure washers, and other outdoor power equipment, making it a versatile choice for both professional and homeowner use.

One of the standout features of the Briggs & Stratton 030208 is its 8.5-foot-pounds of torque, which translates into powerful performance for heavy-duty tasks. The engine operates on a 4-cycle system, ensuring lower emissions and reduced fuel consumption compared to 2-cycle engines. This not only makes it eco-friendly but also enhances its overall efficiency, allowing users to accomplish more with less fuel.

In terms of technology, the 030208 integrates advanced engineering elements designed for improved operability. The engine features a durable and reliable overhead valve (OHV) configuration, providing increased airflow and better cooling during operation. This design contributes to a longer engine life and enhanced performance in demanding conditions.

Another notable characteristic of the Briggs & Stratton 030208 is its ease of starting. The engine is equipped with a choke lever, ensuring a smooth and hassle-free start-up process, even in cold weather. Additionally, the maintenance-friendly design includes a removable air filter, allowing for straightforward cleaning and replacement, which saves users time and effort in upkeep.

The compact design of the 030208 makes it suitable for applications requiring limited space while still delivering substantial power. Weighing approximately 51 pounds, it is light enough to be portable, yet sturdy enough to withstand the rigors of continuous use.

Overall, the Briggs & Stratton 030208 engine represents a blend of innovation and practicality, characterized by its strong torque, efficient fuel consumption, and user-friendly maintenance features. This engine continues to be a favored choice among consumers looking for dependable outdoor power solutions, showcasing the brand's commitment to quality and performance in the engine manufacturing industry.