3500W Portable Generator

SPECIFICATIONS

Maximum Surge Watts . . . . . . . . . . . . . . . . . .4,800 watts Continuous Wattage Capacity . . . . . . . . . . . .3,500 watts Power Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0 Rated Maximum Continuous AC Load Current:

At 120 Volts . . . . . . . . . . . . . . . . . . . . . . . . .29.2 Amps At 240 Volts . . . . . . . . . . . . . . . . . . . . . . . . .14.6 Amps Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–phase Rated Frequency . . . . . . . . . . . . . . . . . . . . . . . . .60 Hertz Fuel Tank Capacity . . . . . . . . . . . . . . . . . . . . 4 U.S. gallons Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 127 lbs.

GENERAL MAINTENANCE RECOMMENDATIONS

The Owner/Operator is responsible for making sure that all periodic maintenance tasks are completed on a timely basis; that all discrepancies are corrected; and that the unit is kept clean and properly stored. NEVER operate a

damaged or defective generator.

Engine Maintenance

See engine owner’s manual for instructions.

CAUTION

Avoid prolonged or repeated skin contact with used motor oil.

•Used motor oil has been shown to cause skin cancer in certain laboratory animals.

•Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

Generator Maintenance

Generator maintenance consists of keeping the unit clean and dry. Operate and store the unit in a clean dry environment where it will not be exposed to excessive dust, dirt, moisture or any corrosive vapors. Cooling air slots in the generator must not become clogged with snow, leaves or any other foreign material.

NOTE: DO NOT use a garden hose to clean generator. Water can enter engine fuel system and cause problems. In addition, if water enters generator through cooling air slots, some of the water will be retained in voids and cracks of the rotor and stator winding insulation.Water and dirt buildup on the generator internal windings will eventually decrease the insulation resistance of these windings.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR GENERATOR

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

Generator Cleaning

• Use a damp cloth to wipe exterior surfaces clean.

CAUTION

Improper treatment of generator can damage it and shorten its life.

•DO NOT expose generator to excessive moisture, dust, dirt, or corrosive vapors.

•DO NOT insert any objects through cooling slots.

•Use a soft bristle brush to loosen caked on dirt or oil.

•Use a vacuum cleaner to pick up loose dirt and debris.

•Use low pressure air (not to exceed 25 psi) to blow away dirt. Inspect cooling air slots and opening on generator.These openings must be kept clean and unobstructed.

12

Page 11 Page 13
Page 12
Image 12
Briggs & Stratton 030208 Specifications, General Maintenance Recommendations, Engine Maintenance, Generator Maintenance
Page 11 Page 13

030208 specifications

The Briggs & Stratton 030208 is a popular and reliable model widely recognized for its efficiency, durability, and robust performance in various applications. This engine is primarily designed for portable generators, lawn mowers, pressure washers, and other outdoor power equipment, making it a versatile choice for both professional and homeowner use.

One of the standout features of the Briggs & Stratton 030208 is its 8.5-foot-pounds of torque, which translates into powerful performance for heavy-duty tasks. The engine operates on a 4-cycle system, ensuring lower emissions and reduced fuel consumption compared to 2-cycle engines. This not only makes it eco-friendly but also enhances its overall efficiency, allowing users to accomplish more with less fuel.

In terms of technology, the 030208 integrates advanced engineering elements designed for improved operability. The engine features a durable and reliable overhead valve (OHV) configuration, providing increased airflow and better cooling during operation. This design contributes to a longer engine life and enhanced performance in demanding conditions.

Another notable characteristic of the Briggs & Stratton 030208 is its ease of starting. The engine is equipped with a choke lever, ensuring a smooth and hassle-free start-up process, even in cold weather. Additionally, the maintenance-friendly design includes a removable air filter, allowing for straightforward cleaning and replacement, which saves users time and effort in upkeep.

The compact design of the 030208 makes it suitable for applications requiring limited space while still delivering substantial power. Weighing approximately 51 pounds, it is light enough to be portable, yet sturdy enough to withstand the rigors of continuous use.

Overall, the Briggs & Stratton 030208 engine represents a blend of innovation and practicality, characterized by its strong torque, efficient fuel consumption, and user-friendly maintenance features. This engine continues to be a favored choice among consumers looking for dependable outdoor power solutions, showcasing the brand's commitment to quality and performance in the engine manufacturing industry.
Top Page Image Contents