3500W Portable Generator

6.Retain wheel on axle stud with retaining pin. Install other wheel on remaining axle stud the same way.

7.Attach support leg using two 1/2” or 13mm wrenches with 20mm cap screws and lock nuts.

8.Center lifting handle on generator end of cradle. Attach handle using two 1/2” or 13mm wrenches with 45mm capscrews and hex nuts.

BEFORE STARTING THE

ENGINE

Add Engine Oil

• Place generator on a level surface.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine manual for oil fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

Add Fuel

NOTE: This gasoline engine is certified to operate on

gasoline. Exhaust Emission Control System: EM (Engine Modifications).

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING FUEL

•Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Fill fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

1.Use clean, fresh, regular UNLEADED fuel with a minimum of 85 octane. DO NOT use fuel which contains Methanol. DO NOT mix oil with fuel.

•Refer to engine owner’s manual and follow oil recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

2.Clean area around fuel fill cap, remove cap.

3.Slowly add regular unleaded fuel to fuel tank. Be careful not to overfill. Allow about 1.5" of tank space for fuel expansion (Figure 2).

NOTE: The generator assembly rotates on a prelubricated and sealed ball bearing that requires no additional lubrication for the life of the bearing.

Figure 2 - Fuel Expansion

 

AirSpace

Tank

 

 

 

Fuel

 

1.5”

 

 

 

 

4.

Install fuel cap and wipe up any spilled fuel.

 

7

Page 6 Page 8
Page 7
Image 7
Briggs & Stratton 030208 owner manual Before Starting Engine, Add Engine Oil, Add Fuel, When Adding Fuel
Page 6 Page 8

030208 specifications

The Briggs & Stratton 030208 is a popular and reliable model widely recognized for its efficiency, durability, and robust performance in various applications. This engine is primarily designed for portable generators, lawn mowers, pressure washers, and other outdoor power equipment, making it a versatile choice for both professional and homeowner use.

One of the standout features of the Briggs & Stratton 030208 is its 8.5-foot-pounds of torque, which translates into powerful performance for heavy-duty tasks. The engine operates on a 4-cycle system, ensuring lower emissions and reduced fuel consumption compared to 2-cycle engines. This not only makes it eco-friendly but also enhances its overall efficiency, allowing users to accomplish more with less fuel.

In terms of technology, the 030208 integrates advanced engineering elements designed for improved operability. The engine features a durable and reliable overhead valve (OHV) configuration, providing increased airflow and better cooling during operation. This design contributes to a longer engine life and enhanced performance in demanding conditions.

Another notable characteristic of the Briggs & Stratton 030208 is its ease of starting. The engine is equipped with a choke lever, ensuring a smooth and hassle-free start-up process, even in cold weather. Additionally, the maintenance-friendly design includes a removable air filter, allowing for straightforward cleaning and replacement, which saves users time and effort in upkeep.

The compact design of the 030208 makes it suitable for applications requiring limited space while still delivering substantial power. Weighing approximately 51 pounds, it is light enough to be portable, yet sturdy enough to withstand the rigors of continuous use.

Overall, the Briggs & Stratton 030208 engine represents a blend of innovation and practicality, characterized by its strong torque, efficient fuel consumption, and user-friendly maintenance features. This engine continues to be a favored choice among consumers looking for dependable outdoor power solutions, showcasing the brand's commitment to quality and performance in the engine manufacturing industry.
Top Page Image Contents