STORAGE

STORAGE

The generator should be started at least once every seven days and allowed to run at least 30 minutes. If this cannot be done and you must store the unit for more than 30 days, use the following information as a guide to prepare it for storage.

Long Term Storage Instructions

It is important to prevent gum deposits from forming in essential fuel system parts, such as the carburetor, fuel filter, fuel hose or tank during storage. Also, experience indicates that alcohol-blended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic fuel can damage the fuel system of an engine while in storage.

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK

Store away from furnaces, stoves, water heaters, clothes dryers or other appliances that have pilot light or other ignition source because they can ignite fuel vapors.

WHEN DRAINING FUEL

Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

Drain fuel tank outdoors.

Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

DO NOT light a cigarette or smoke.

Protect Fuel System

Fuel Stabilizer:

Run engine outdoors for several minutes to be sure treated fuel has replaced untreated fuel in carburetor.

If fuel preserver is not used, then always remove all fuel from tank and run engine until it stops from lack of fuel.

Change Oil

While engine is still warm, drain oil from crankcase. Refill with recommended grade.

Oil Cylinder Bore

Remove spark plug and pour about 1/2 ounce (15 ml) of clean engine oil into the cylinder.

Install spark plug and pull recoil starter handle slowly to distribute oil.

WARNING

Unintentional sparking can result in fire or electric shock.

• NEVER crank engine with spark plug removed.

Generator

1.Clean generator as outlined in “Generator Cleaning”.

2.Check that cooling air slots and openings on generator are open and unobstructed.

Other Storage Tips

1.DO NOT store fuel from one season to another unless it has been treated as described in “Protect Fuel System”.

2.Replace fuel can if it starts to rust. Contaminated fuel will cause engine problems.

3.If possible, store unit indoors and cover it to give protection from dust and dirt. BE SURE TO EMPTY

FUEL TANK.

Follow these instructions if storing fuel more than 30 days.

To protect the fuel system from gum formation, use Briggs

&Stratton FRESH START™ fuel stabilizer plus, or FRESH START™ continuous fuel preserver (concentrated liquid cartridge), or FRESH START™ preservative & stabilizer (granular).

If fuel stabilizer is used, you do not need to drain fuel prior to storage. If the FRESH START™ continuous fuel preserver (concentrated liquid cartridge) is used, there is no need to drain fuel prior to storage as long as the cartridge contains stabilizer for the storage season.

4.Cover unit with a suitable protective cover that does not retain moisture.

WARNING

Storage covers can be flammable.

DO NOT place a storage cover over a hot generator.

Let equipment cool for a sufficient time before placing the cover on the equipment.

5. Store generator in clean, dry area.

17

Page 17
Image 17
Briggs & Stratton 030320, 030319 Long Term Storage Instructions, Protect Fuel System, Generator, Other Storage Tips

030319, 030320 specifications

Briggs & Stratton has been a trusted name in the power equipment industry for over a century, and their 030320 and 030319 models are perfect examples of their commitment to quality and innovation. These engines are designed to power a variety of outdoor equipment, including lawn mowers, generators, and pressure washers, making them a versatile choice for homeowners and professionals alike.

One of the main features of the Briggs & Stratton 030320 and 030319 engines is their impressive power output. The 030320 model boasts a robust 550cc displacement, while the 030319 offers a slightly lower 450cc. This power enables these engines to tackle demanding tasks with ease, ensuring that users can complete their projects efficiently and effectively.

Both models are equipped with advanced technologies that enhance performance and reliability. The ReadyStart system allows for effortless starting without the need to prime or choke the engine, significantly reducing the time spent preparing the equipment for use. Additionally, the engines feature a durable overhead valve (OHV) design, which promotes better fuel efficiency and reduced emissions compared to traditional side-valve engines.

Another key characteristic of the Briggs & Stratton 030320 and 030319 engines is their robust construction. They are built with high-quality materials, which provide durability and longevity, making them suitable for heavy-duty applications. The engines also feature a steel crankshaft that withstands high-stress conditions and a cast iron sleeve for improved wear resistance.

Maintenance is made easy with these engines, thanks to their accessible oil drain and air filter design. Users can quickly change the oil and replace the air filter, ensuring that the engine functions at peak performance over time. This focus on user-friendly maintenance makes the 030320 and 030319 models ideal for individuals who want reliable performance without the hassle of complicated upkeep.

Safety is also a priority in the design of these engines. They come equipped with features such as a low-oil shutdown system that automatically turns off the engine when oil levels drop too low, preventing potential damage. This added layer of protection ensures that users can operate their equipment with peace of mind.

In summary, the Briggs & Stratton 030320 and 030319 engines combine power, efficiency, durability, and user-friendly features. Whether you are a homeowner tackling seasonal yard work or a professional in need of reliable equipment, these engines deliver exceptional performance and reliability, solidifying Briggs & Stratton’s reputation as a leader in the industry.