ASSEMBLY

ASSEMBLY

9/16” wrench

Pliers

Your generator requires some assembly and is ready for use after it has been properly serviced with the recommended oil and fuel.

If you have any problems with the assembly of your generator, please call the generator helpline at

1-800-743-4115. If calling for assistance, please have the model, revision, and serial number from the data tag available. See “Know Your Generator” for data tag location.

Unpacking the Generator

1.Set the carton on a rigid flat surface.

2.Open carton completely by cutting each corner from top to bottom.

3.Cut ties holding accessory kit and axle to generator and remove everything from carton.

4.Leave generator on carton to install wheel kit.

Install Wheel Kit

NOTE: Wheel kit is not intended for over-the-road use. You will need the following tools to install these components:

13mm wrench

Socket wrench with a 13mm socket

Figure 1 — Install Wheel Kit

• Safety glasses

Refer to Figure 1 and install the wheel kit as follows:

1.Tip generator so that engine end is up.

2.Slide axle through both mounting brackets.

3.Place a wheel on each side with raised hub inboard.

4.Place a washer on axle and then place an e-ring in axle groove.

5.Install e-ring with pliers, squeezing from top of e-ring to bottom of axle.

CAUTION

E-rings can cause eye injury.

E-rings can spring back and become airborne when installing or removing.

• Always wear eye protection when installing/removing e-rings.

6.Repeat step 4 and 5 to secure second wheel.

7.Tip generator so that engine side is down.

8.Line up holes in support leg with holes in generator frame.

9.Attach support leg using 2 capscrews (M8 x 16 mm) and 2 hex nuts.Tighten with a 13mm socket wrench and 13mm wrench.

Capscrew

 

 

Lock Washer

 

 

Handle

 

 

 

 

Washer

 

Axle

 

 

Capscrew

 

Support Leg

Wheel

E-Ring

 

Nut

 

 

6

 

Page 6
Image 6
Briggs & Stratton 030319, 030320 operating instructions Assembly, Unpacking the Generator, Install Wheel Kit

030319, 030320 specifications

Briggs & Stratton has been a trusted name in the power equipment industry for over a century, and their 030320 and 030319 models are perfect examples of their commitment to quality and innovation. These engines are designed to power a variety of outdoor equipment, including lawn mowers, generators, and pressure washers, making them a versatile choice for homeowners and professionals alike.

One of the main features of the Briggs & Stratton 030320 and 030319 engines is their impressive power output. The 030320 model boasts a robust 550cc displacement, while the 030319 offers a slightly lower 450cc. This power enables these engines to tackle demanding tasks with ease, ensuring that users can complete their projects efficiently and effectively.

Both models are equipped with advanced technologies that enhance performance and reliability. The ReadyStart system allows for effortless starting without the need to prime or choke the engine, significantly reducing the time spent preparing the equipment for use. Additionally, the engines feature a durable overhead valve (OHV) design, which promotes better fuel efficiency and reduced emissions compared to traditional side-valve engines.

Another key characteristic of the Briggs & Stratton 030320 and 030319 engines is their robust construction. They are built with high-quality materials, which provide durability and longevity, making them suitable for heavy-duty applications. The engines also feature a steel crankshaft that withstands high-stress conditions and a cast iron sleeve for improved wear resistance.

Maintenance is made easy with these engines, thanks to their accessible oil drain and air filter design. Users can quickly change the oil and replace the air filter, ensuring that the engine functions at peak performance over time. This focus on user-friendly maintenance makes the 030320 and 030319 models ideal for individuals who want reliable performance without the hassle of complicated upkeep.

Safety is also a priority in the design of these engines. They come equipped with features such as a low-oil shutdown system that automatically turns off the engine when oil levels drop too low, preventing potential damage. This added layer of protection ensures that users can operate their equipment with peace of mind.

In summary, the Briggs & Stratton 030320 and 030319 engines combine power, efficiency, durability, and user-friendly features. Whether you are a homeowner tackling seasonal yard work or a professional in need of reliable equipment, these engines deliver exceptional performance and reliability, solidifying Briggs & Stratton’s reputation as a leader in the industry.