Oil Recommendation

Use a high quality detergent oil classified “For Service SF, SG, SH, SJ” or higher. Do not use special additives.

Determine best grade for use by temperature during operation, see chart.

SAE 30 405F and higher (55C and higher)

is good for all purpose use above 40°F, use below 40°F will cause hard starting.

10W-300 to 1005F (−18 to 385C)

is better for varying temperature conditions. This grade of oil improves cold weather starting, but may increase oil consumption at 80°F (27°C) or higher.

Check oil level frequently at higher temperatures.

Synthetic 5W-30−20 to 1205F (−30 to 405C)

provides the best protection at all temperatures as well as improved starting with less oil consumption.

5W-30405F and below (55C and below)

is recommended for winter use, and works best in cold conditions.

Oil Capacity

The engine holds approximately 5/8 qt. (20 oz; 0.6 liter).

Adding Oil

•Check oil level before starting the engine.

•Keep oil level at FULL.

•Check level daily, or after every eight (8) hours.

1.Place engine level and clean around oil fill plug. (A)

2.Remove oil fill plug. Fill oil to point of overflowing. (B)

3.Replace plug before starting engine.

A

B

6