Briggs & Stratton 1732, 1738, 1628, 1524 manual Specifications, Engine, Chassis, Dimensions

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

*The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

ENGINE:

1450 Series Briggs & Stratton

Make	Briggs & Stratton
Model	Snow Series Max, M20H
Gross Torque*	14.50 ft-lbs (19.7 Nm) @ 3060 rpm
Displacement	18.6 cu. in. (305 cc)
Oil Capacity	28 oz. (,84 l)

CHASSIS:

Wheels
- 1524, 1628	Tire Size: 16 x 4.8
	Inflation Pressure: 20 psi (1,37 bar)
- 1732, 1738	Tire Size: 16 x 6.5
	Inflation Pressure: 14 psi (,96 bar)
Spout Rotation	210 Degrees
Impeller	12 in. (30 cm) 4 Blade Ribbon Flighted Steel
Auger Opening Height	19 in. (47.5 cm)
Drive System	Friction Disc, 5 Forward Speeds, 2 Reverse

1550 Series Briggs & Stratton

Make	Briggs & Stratton	DIMENSIONS:
Model	Snow Series Max, M21H
Gross Torque*	15.50 ft-lbs (21.0 Nm) @ 3060 rpm	Effective Clearing Width
Displacement	20.87 cu. in. (342 cc)
		-1524	24 in. (60 cm)
Oil Capacity	28 oz. (,84 l)
		-1628	28 in. (70 cm)
1650 Series Briggs & Stratton		-1732	32 in. (80 cm)
		-1738	38 in. (97 cm)
Make	Briggs & Stratton	Length
Model	Snow Series Max, M21H
Gross Torque*	16.50 ft-lbs (22.4 Nm) @ 3060 rpm	-1524	57 in. (142 cm)
Displacement	20.87 cu. in. (342 cc)	-1628	57 in.(142 cm)
Oil Capacity	28 oz. (,84 l)	-1732	57 in. (142 cm)
		-1738	57 in. (142 cm)
		Height
		-1524	38 in. (93 cm)
		-1628	38 in. (93 cm)
		-1732	38 in. (93 cm)
		-1738	38 in. (93 cm)
		Weight
		-1524	245 lbs (111 kg)
		-1628	265 lbs (120 kg)
		-1732	275 lbs (125 kg)
		-1738	300 lbs (136 kg)

31