Speed Clean™ 2300 PSI Pressure Washer

O–Ring Maintenance

Through the normal operation of your pressure washer, o–rings, which keep the connections of the hoses and spray gun tight and leak–free, may become worn or damaged.

An O–Ring Maintenance Kit is provided with your pressure washer which includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit’s o-rings. Note that not all of the parts in the kit will be used on your unit.

To remove a worn or damaged o–ring:

•Use a small flathead screwdriver to get underneath the o-ring and pry it off.

Cleaning Chemical Injection Hose

If you used the chemical injection hose, you must flush it with clean water before stopping the engine.

1.Place the chemical injection hose in a bucket full of clean water.

2.Slide the adjustable nozzle forward to the low pressure position. Flush for 1-2 minutes.

3.Shut off the engine.

IMPORTANT: Simply shutting OFF engine will not release pressure in the system. When the engine has

shut down, squeeze the trigger on the spray gun to relieve the pressure in the hose.

Change pump oil as follows:

•Drain engine oil and fuel from pressure washer.

•Use a 8mm allen wrench to remove the black pump oil cap between the high pressure outlet and garden hose inlet (Figure 14).

Figure 14 - Changing Pump Oil

Oil Cap

•Tilt the pressure washer to drain the oil into an approved container until it drips slowly from the pump.

•Tilt the pressure washer in the opposite direction and empty the premeasured pump oil bottle into the same opening (a small funnel may be helpful).

•Install the black pump oil cap and tighten firmly.

•Set the pressure washer in the upright position. Add fuel and engine oil.

Pump Maintenance

Changing Pump Oil

Change oil every 50 hours or once yearly, whichever occurs first.

NOTE: Purchase a premeasured bottle of pump oil, item number 190586GS, by contacting the nearest authorized service center.

ENGINE MAINTENANCE

See the engine owner’s manual for instructions on how to properly maintain the engine.

CAUTION! Avoid prolonged or repeated skin contact with used motor oil. Used motor oil has been shown to cause skin cancer in certain laboratory animals.Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

13

Page 12 Page 14
Page 13
Image 13
Briggs & Stratton 1909-0 Engine Maintenance, Ring Maintenance, Cleaning Chemical Injection Hose, Pump Maintenance
Page 12 Page 14

1909-0 specifications

Briggs & Stratton is an iconic American manufacturer renowned for its small engines commonly used in outdoor power equipment. Among their extensive product line, the Briggs & Stratton 1909-0 model stands out due to its advanced features and exceptional performance. This engine has become a trusted choice for both homeowners and professionals alike.

The Briggs & Stratton 1909-0 is a four-stroke air-cooled engine that delivers reliable power for a variety of applications. Its 6.75 horsepower output is perfectly suited for lawnmowers, pressure washers, and other gardening and industrial equipment. One of the key characteristics of this engine is its compact design, making it easy to install and maneuver in various settings.

Equipped with a durable aluminum alloy crankcase and a forged steel connecting rod, the 1909-0 is built to handle rigorous tasks while ensuring a longer lifespan. The overhead valve (OHV) technology optimizes combustion efficiency and enhances fuel economy, delivering more torque and power while reducing emissions. This design is particularly beneficial for homeowners keen on environmental sustainability.

An important technological aspect of the Briggs & Stratton 1909-0 is its Easy Start system, which simplifies the starting process. Users can expect quick and hassle-free starts, even in cold weather conditions. Additionally, the engine features an integrated fuel tank, which minimizes the need for separate storage, enhancing convenience during operation.

This model also boasts an innovative air filtration system that protects the engine from dust and debris, ensuring optimal performance and reducing maintenance needs. Regular upkeep is made simpler through accessible drain plugs for oil and fuel, promoting an efficient maintenance routine that keeps the engine running smoothly.

With its robust design and user-friendly features, the Briggs & Stratton 1909-0 is a remarkable example of the advancements in small engine technology. It exemplifies the brand's commitment to quality, making it a dependable choice for anyone in need of reliable power for their equipment. Whether for professional landscaping or DIY outdoor projects, the 1909-0 guarantees peak performance and durability, solidifying its legacy in the world of small engines.
Top Page Image Contents