About your engine warranty: (see next page for statement of LIMITED WARRANTY).

Briggs & Stratton welcomes warranty repair and apologizes to you for being inconvenienced. Any Authorized Service Dealer may perform warranty repairs. Most warranty repairs are handled routinely, but sometimes requests for warranty service may not be appropriate. For example, warranty would not apply if engine damage occurred because of misuse, lack of routine maintenance, shipping, handling, warehousing or improper installation. Similarly, warranty is void if the serial number of the engine has been removed or the engine has been altered or modified.

If a customer differs with the decision of the Service Dealer, an investigation will be made to determine whether the warranty applies. Ask the Service Dealer to submit all supporting facts to his Distributor or the Factory for review. If the Distributor or the Factory decides that the claim is justified, the customer will be fully reimbursed for those items that are defective. To avoid misunderstanding which might occur between the customer and the Dealer, listed below are some of the causes of engine failure that the warranty does not cover.

Normal wear:

Engines, like all mechanical devices, need periodic parts ser- vice and replacement to perform well. Warranty will not cover repair when normal use has exhausted the life of a part or an engine.

Improper maintenance:

The life of an engine depends upon the conditions under which it operates, and the care it receives. Some applications, such as tillers, pumps and rotary mowers, are very often used in dusty or dirty conditions, which can cause what appears to be premature wear. Such wear, when caused by dirt, dust, spark plug cleaning grit, or other abrasive material that has entered the engine because of improper maintenance, is not covered by warranty.

This warranty covers engine related defective material and/or workmanship only, and not replacement or refund of the equipment to which the engine may be mounted. Nor does the warranty extend to repairs required be- cause of:

1.PROBLEMS CAUSED BY PARTS THAT ARE NOT ORIGINAL BRIGGS & STRATTON PARTS.

2.Equipment controls or installations that prevent starting, cause unsatisfactory engine performance, or shorten en- gine life. (Contact equipment manufacturer.)

3.Leaking carburetors, clogged fuel pipes, sticking valves, or other damage, caused by using contaminated or stale fuel. (Use clean, fresh, lead-free gasoline and Briggs & Stratton gasoline stabilizer, Part No. 5041.)

4.Parts which are scored or broken because an engine was operated with insufficient or contaminated lubricating oil, or an incorrect grade of lubricating oil (check oil level daily

or after every 8 hours of operation. Refill when necessary and change at recommended intervals.) OIL GARDmay not shut down running engine. Engine damage may occur if oil level is not properly maintained. Read Operat- ing & Maintenance Instructions.

5.Repair or adjustment of associated parts or assemblies such as clutches, transmissions, remote controls, etc., which are not manufactured by Briggs & Stratton.

6.Damage or wear to parts caused by dirt, which entered the engine because of improper air cleaner maintenance, re-assembly, or use of a non-original air cleaner element

or cartridge. (At recommended intervals, clean and re-oil the Oil-Foamelement or the foam pre-cleaner, and re- place the cartridge.) Read Operating & Maintenance Instructions.

7.Parts damaged by overspeeding, or overheating caused by grass, debris, or dirt, which plugs or clogs the cooling fins, or flywheel area, or damage caused by operating the engine in a confined area without sufficient ventilation. (Clean fins on the cylinder, cylinder head and flywheel at recommended intervals.) Read Operating & Maintenance Instructions.

8.Engine or equipment parts broken by excessive vibration caused by a loose engine mounting, loose cutter blades, unbalanced blades or loose or unbalanced impellers, im- proper attachment of equipment to engine crankshaft, overspeeding or other abuse in operation.

9.A bent or broken crankshaft, caused by striking a solid ob- ject with the cutter blade of a rotary lawn mower, or exces- sive v-belt tightness.

10.Routine tune-up or adjustment of the engine.

Warranty is available only through service dealers which have been authorized by Briggs & Stratton Corporation. Your nearest Authorized Service Dealer is listed in the “Yellow Pages” of your telephone directory under “En- gines, Gasoline” or “Gasoline Engines,” “Lawn Mow- ers,” or similar category.

Briggs & Stratton Engines Are Made Under One Or More Of The Following Patents: Design D-247,177 (Other Patents Pending)

5,852,951

5,548,955

5,269,713

5,188,069

5,040,644

4,895,119

4,630,498

DES. 309,458

5,823,153

5,546,901

5,265,700

5,186,142

5,040,503

4,875,448

4,522,080

DES. 309,457

5,819,513

5,503,125

5,243,878

5,138,996

5,009,208

4,819,593

4,520,288

DES. 308,872

5,765,713

5,501,203

5,235,943

5,105,331

4,996,956

4,719,682

4,453,507

DES. 308,871

5,645,025

5,497,679

5,197,425

5,086,890

4,995,357

4,694,792

4,430,984

 

5,642,701

5,320,795

5,197,422

5,070,829

4,977,879

4,684,917

4,355,253

 

5,606,948

5,271,363

5,191,864

5,058,544

4,971,219

4,633,556

 

 

In the USA and Canada, a 24 hour hot line, 1-800-233-3723,has a menu of pre-recorded messages offering you engine maintenance information.

18

Page 18
Image 18
Briggs & Stratton 19E400 19F400 19G400 192400 196400 197400 250400 256400 257400 warranty Normal wear, Improper maintenance