Snapper 2700 PSI Pressure Washer

Connect Hose and Water Supply to Pump

IMPORTANT: You must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine. Starting engine without all hoses connected and water supplied will damage the pump.

•Uncoil high pressure hose and attach quick connect end of hose to the base of the spray gun (Figure 5). Pull down on the collar of the quick connect, slide onto the spray gun and let go of collar. Tug on hose to be sure of a tight connection.

Figure 5 — Connect High Pressure Hose to Spray Gun

Connect high

pressure hose

here.

•Similarly, attach the other end of the high pressure hose to the high pressure outlet on the pump. Pull down on the collar of the quick connect, slide onto the pump and let go of collar. Pull on hose to be sure of a tight connection.

•Before you connect your garden hose to the water inlet, inspect the inlet screen (Figure 6). Clean the screen if it contains debris, replace if damaged. DO NOT RUN THE PRESSURE WASHER IF THE SCREEN IS DAMAGED.

Figure 6 — Connect Garden Hose to Water Inlet

Inspect inlet

screen. Do Not

use if damaged;

clean if dirty.

•Run water through your garden hose for 30 seconds to clean out any debris. Turn off water.

IMPORTANT: Do Not siphon standing water for the water supply. Use ONLY cold water (less than 100°F).

•Connect the garden hose to the water inlet. Tighten by hand (Figure 6).

CAUTION! There MUST be at least ten feet of unrestricted garden hose between the pressure washer inlet and any flow shut off device, such as a ‘Y’ shut-off connector or other convenience-type water shut-off valve. Damage to pressure washer resulting from disregarding this warning will not be covered by the warranty.

•Turn ON the water.

•Squeeze the trigger on the spray gun until you have a steady stream of water. This purges the pump of air and impurities.

CAUTION! Before starting the pressure washer, be sure you are wearing adequate eye protection.

Checklist Before Starting Engine

Review the unit’s assembly to confirm you have performed all of the following:

•Make sure the handle is secure.

•Check for properly tightened hose connections.

•Check to make sure that there are no kinks, cuts, or damage to the high pressure hose.

•Check that oil has been added to the proper level in the engine crankcase.

•Add the proper gasoline to fuel tank.

•Provide a proper water supply (not to exceed 100°F) at a minimum flow of 2.8 gallons per minute.

•Be sure to read “Safety Rules” and “How To Use Your Pressure Washer” before using the pressure washer.

7

Page 6 Page 8
Page 7
Image 7
Briggs & Stratton 2700PSI owner manual Connect Hose and Water Supply to Pump, Checklist Before Starting Engine
Page 6 Page 8

2700PSI specifications

The Briggs & Stratton 2700PSI pressure washer is an outstanding choice for both residential and light commercial cleaning tasks. Known for its robust design and powerful performance, this pressure washer delivers a maximum pressure of 2700 PSI and a water flow rate of 2.3 GPM, making it capable of tackling a wide range of cleaning jobs, from driveways to decks and patios.

A key feature of the Briggs & Stratton 2700PSI is its reliable engine. Powered by a Briggs & Stratton OHV engine, this pressure washer provides enhanced durability and efficiency. The engine operates smoothly and is designed for easy starting, thanks to its patented Ready Start technology, which eliminates the need for a primer bulb. Users can expect hassle-free operation, reducing the frustration often associated with starting gas-powered equipment.

In terms of versatility, the 2700PSI model offers five interchangeable nozzles, allowing users to adjust the spray pattern according to the specific cleaning task at hand. Ranging from a focused, high-pressure stream to a wide, gentle spray, these nozzles ensure that users can clean delicate surfaces without causing damage while still achieving superior cleaning performance on tough stains.

One of the standout features of this pressure washer is its onboard detergent tank. This built-in tank allows for easy application of soap, making it ideal for breaking down grime and dirt on heavily soiled surfaces. The pressure washer also includes a soap nozzle, optimizing soap application for effective cleaning results.

The Briggs & Stratton 2700PSI is designed with user convenience in mind. It comes equipped with a 25-foot high-pressure hose, providing ample reach for various cleaning tasks without the need to constantly move the machine. Additionally, its compact and lightweight design, along with sturdy wheels, enhances portability, making it easy to transport and store when not in use.

Safety features are also integrated into the design of this pressure washer. The total stop system automatically shuts off the pump when the trigger is not engaged, prolonging the lifespan of the motor and pump while conserving energy.

Overall, the Briggs & Stratton 2700PSI pressure washer stands out as a powerful and efficient cleaning solution. With its reliable engine, versatile nozzles, onboard detergent tank, and thoughtful safety features, it represents a great investment for anyone looking to maintain their outdoor spaces with ease and effectiveness. Whether washing vehicles, cleaning siding, or prepping surfaces for painting, this pressure washer is equipped to handle the job efficiently, making it a popular choice among homeowners and professionals alike.
Top Page Image Contents