FEATURES | 8000W Portable Generator | PowerBOSS™ |
|
|
|
KNOW YOUR GENERATOR
Read this owner’s manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Oil Fill Cap
Circuit Breakers (AC)
Battery Float Charger
Run/Stop Switch
120 Volt AC, 30 Amp
Locking Receptacle
120/240 Volt AC, 30 Amp | 120 Volt AC, 20 Amp |
Locking Receptacle | Duplex Receptacles |
120 Volt AC, 20 Amp Duplex Receptacles — May be used to supply electrical power for the operation of 120Volt AC, 20 Amp, single phase, 60 Hz electrical lighting, appliance, tool and motor loads.
120 Volt AC, 30 Amp Locking Receptacle — May be used to supply electrical power for the operation of
120 Volt AC, 30 Amp, single phase, 60 Hz electrical lighting, appliance, tool and motor loads.
120/240 Volt AC, 30 Amp Locking Receptacle — May be used to supply electrical power for the operation of
120and/or 240 Volt AC, 30 Amp, single phase, 60 Hz electrical lighting, appliance, tool and motor loads.
240 Volt AC, 50 Amp Receptacle — May be used to supply electrical power for the operation of 240 Volt AC, 50 Amp, single phase, 60 Hz electrical loads.
Air Cleaner — Protects engine by filtering dust and debris out of intake air.
Battery Float Charger — Use battery float charger jack to keep the starting battery charged and ready for use.
Choke Lever
Ignition Switch
Fuel Tank
Air Cleaner
Spark Arrester Muffler
240 Volt AC, 50 Amp
Receptacle
Grounding Fastener
Choke Lever — Used when starting a cold engine.
Circuit Breakers (AC) — Each receptacle is provided with a "push to reset" circuit breaker to protect the generator against electrical overload.
Data Tag (not shown) – Provides model, revision and serial number of generator. Please have these readily available if calling for assistance.
Fuel Tank — Capacity of eight (8) U.S. gallons. Ignition Switch — Press to start the engine.
Grounding Fastener — If required, please consult a qualified electrician, electrical inspector, or local agency having jurisdiction.
Oil Fill Cap — Add oil to engine here.
Run/Stop Switch — Must be in “Run” position to start engine. Set to “Stop” to stop a running engine.
Spark Arrester Muffler — Exhaust muffler lowers engine noise and is equipped with a spark arrester screen.
5
