PowerBOSS™

8000W Portable Generator

OPERATION

 

 

 

USING THE GENERATOR

System Ground

The generator has a system ground that connects the generator frame components to the ground terminals on the AC output receptacles.The system ground is connected to the AC neutral wire (see “Equipment Description”, earlier in this manual).

Special Requirements

There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction.

In some areas, generators are required to be registered with local utility companies.

If the generator is used at a construction site, there may be additional regulations which must be observed.

Connecting to a Building’s Electrical System

Connections for standby power to a building’s electrical system must be made by a qualified electrician.The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.

WARNING

Generator produces powerful voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

DO NOT touch bare wires or receptacles.

DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

DO NOT operate generator in the rain.

DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

DO NOT allow unqualified persons or children to operate or service generator.

Generator Location

Generator Clearance

WARNING

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

Operate generator ONLY outdoors.

Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

DO NOT operate generator inside any building or enclosure, including the generator compartment of a recreational vehicle (RV).

The generator must be at least 5 ft. (152 cm) from structures having combustible walls and/or other combustible materials. Leave at least 3 ft. (92 cm) all around generator including overhead, for adequate cooling, maintenance and servicing.

Place generator in a well ventilated area, which will allow for removal of deadly exhaust gas. DO NOT place generator where exhaust gas could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes or other openings that can allow exhaust gas to collect in a confined area (Figure 4). Prevailing winds and air currents should be taken into consideration when positioning generator.

Figure 4 — Generator Clearance

Typical Generator Shown

Exhaust Port

8

Page 8
Image 8
Briggs & Stratton 30228 owner manual Using the Generator, System Ground, Connecting to a Building’s Electrical System

30228 specifications

The Briggs & Stratton 30228 is a high-performance generator designed for a variety of residential and commercial applications. Known for its reliability and durability, this portable generator is an excellent choice for anyone in need of backup power during outages or for outdoor activities that require electricity.

One of the standout features of the Briggs & Stratton 30228 is its powerful engine. Equipped with a 479cc OHV (Overhead Valve) engine, it delivers a robust output of 7,500 running watts and up to 9,375 starting watts. This ensures that users can run multiple appliances simultaneously, making it suitable for powering everything from refrigerators and air conditioners to power tools and more.

The generator's design incorporates advanced technologies aimed at maximizing efficiency and usability. One notable feature is its SureStart technology, which ensures easy starting even in low temperatures or after prolonged storage. The automatic idle control feature helps reduce fuel consumption by adjusting the engine speed to match the electrical load, ultimately saving on operational costs and extending run time.

Additionally, the Briggs & Stratton 30228 is built with a heavy-duty steel frame to protect the engine and components from rough handling, ensuring long-lasting performance. Its 7.5-gallon fuel tank provides extended run times, capable of delivering up to 9 hours of continuous power at a 50% load.

The generator features multiple outlets, including four 120V AC outlets, one 120/240V twist-lock outlet for heavy-duty applications, and a circuit breaker for added safety protection. Users will appreciate the ease of transport thanks to its built-in foldable handles and rugged wheels, enabling smooth mobility across various terrains.

Overall, the Briggs & Stratton 30228 combines powerful performance with advanced features and durability, making it an ideal solution for those looking for a reliable power source for emergencies or outdoor activities. Its user-friendly design and efficiency make it a top contender in the portable generator market, appealing to both casual users and professionals alike. Whether for home use or job site applications, this generator proves to be a dependable companion, ensuring that power is just a pull start away.