|
| 500Z 26HP - 48” Mower Deck |
Adjustment |
|
|
Procedures |
|
|
Seat Adjustment |
|
|
See Figure 20. The seat can be adjusted forward and | A |
|
backward. Move the seat adjustment lever towards the |
|
|
left, position the seat as desired, and release the seat |
|
|
adjustment lever to lock the seat into position. |
|
|
| Figure 20. | Seat Adjustment |
| A. Seat Adjustment Lever | |
Ground Speed Control Adjustment
The ground speed control levers can be adjusted in three ways. The alignment of the control levers, the placement of the levers (how close the ends are to one another) and the height of the levers can be adjusted.
TO ADJUST THE HANDLE ALIGNMENT
Loosen the mount bolts (A, Figure 21) and pivot the ground speed control lever(s) (B) to align with each other.
TO ADJUST THE HANDLE PLACEMENT
Loosen the jam nuts and adjust the placement bolt (C) in or out to properly adjust the ground speed control lever end spacing.
TO ADJUST THE HANDLE HEIGHT
Remove the mounting hardware and reposition the ground speed control lever either up or down from its original position. You will need to readjust the ground speed control lever alignment as described above.
B |
A |
C |
Figure 21. Control Lever Adjustment
A.Placement Hardware
B.Ground Speed Control Lever
C.Alignment Hardware
1/2008 | 13 | TP |
