Briggs & Stratton 91200, 92200, 94200 warranty Maintenance, Emission Control, Changing Oil, Task

Models: 91200, 92200, 94200

1 20
Download 20 pages 55.21 Kb
Page 11
Image 11
MAINTENANCE

MAINTENANCE

Regular maintenance will improve the performance and extend the life of the engine. See any Authorized Briggs & Stratton Dealer for service. Use only genuine Briggs &

Stratton parts. Other parts may not perform as well, may damage the engine, and may result in injury. In addition, use of other parts may void your warranty.

MAINTENANCE

EMISSION CONTROL

Maintenance, replacement or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual. However, to obtain no charge repairs under the terms and provisions of the Briggs & Stratton warranty statement, any service or emission control part repair or replacement must be performed by a factory authorized dealer.

Follow the instructions and schedules indicated below.

Task

Perform task at hourly

or calendar interval,

whichever comes first.

Check Oil Level

4

 

 

Change Oil

4*

 

 

Change oil in gear re-

4

 

CHANGING OIL

Change oil after first 5 hours of use.

duction (if equipped)

 

 

 

Service air cleaner

4**

pre-cleaner (if equipped)

 

 

 

Service air cleaner car-

 

tridge (if not equipped

4**

with pre-cleaner)

 

 

 

Service air cleaner car-

 

tridge (if equipped with

4**

1/4” HEX

PIPE

Typical drain plugs

OIL FILL

CAP

OIL

DRAIN

PLUG

pre-cleaner)

 

 

 

Inspect spark arrester

4

(if equipped)

 

 

 

Replace spark plug

4

 

 

Clean cooling system

4**

 

 

Clean combustion

4

chamber

 

*Change oil after first 5 to 8 hours of use, then every 50 hours or every season. Change oil every 25 hours when operating the engine under heavy load or in high temperatures.

**Clean more often under dusty conditions or when airborne debris is present. Replace air cleaner parts, if very dirty.

CAUTION: Used oil is a hazardous waste product. Dispose of used oil properly. Do not discard with household waste. Check with your local authorities, service center, or dealer for safe disposal/recycling facilities.

EMISSION CONTROL WARNING [1] Place engine level.

[2]Place engine level. Dis-

connect spark plug wire and keep it away from spark plug.

[3]With engine OFF but still warm remove oil drain plug and drain oil into appropriate receptacle.

OIL LEVEL

[4]Reinstall oil drain plug. Remove oil fill cap.

[5]Add about 2/3 quart (21 ounces; 0.6 liter) new oil. Fill to point of overflowing.

[6]Replace oil fill cap.

11

Page 11
Image 11
Briggs & Stratton 91200, 92200, 94200 warranty Maintenance, Emission Control, Changing Oil, Task, Typical drain plugs