Briggs & Stratton 91200, 92200, 94200 warranty Type Of Fuel To Use, Adding Fuel, Fuel Fill

Models: 91200, 92200, 94200

1 20
Download 20 pages 55.21 Kb
Page 8
Image 8
FUEL

FUEL TYPE OF FUEL TO USEADDING FUEL

TYPE OF FUEL TO USE

Use clean, fresh, regular unleaded gasoline with a minimum of 77 octane. Fresh fuel prevents gum from forming in the fuel system or on essential carburetor parts. Purchase fuel in quantity that can be used within 30 days.

Do not use gasoline which contains Methanol.

Do not mix oil with gasoline.

For engine protection use Briggs & Stratton Gasoline Additive available from your Authorized Briggs & Stratton Dealer (P/N 5041 or single use pouch).

This engine is certified to operate on gasoline. Exhaust Emission Control System: EM (Engine Modifications).

CAUTION: Some fuels, called oxygenated or reformu- lated gasoline, are gasoline blended with alcohols or ethers. Excessive amounts of these blends can damage the fuel system or cause performance problems. If any undesirable operating symptoms occur, use gasoline with a lower percentage of alcohol or ether.

ADDING FUEL

WARNING

Fuel Fill

[1]Fill fuel tank outdoors or in well-ventilated area, away from sparks, open flames, pilot lights, heat, and other ignition sources.

[2]If fuel spills, wait until it evaporates before starting engine.

[3]Turn engine OFF and let engine cool at least 2 minutes before removing gas cap.

[4]Remove cap. Fill tank to approximately 1/2 inch below lowest portion of fill opening to allow for fuel

expansion. Be careful not to overfill.

Briggs & Stratton Smart-fillfuel can fills to the correct level and automatically shuts off, reducing spills and emissions.

[5]Replace cap before starting.

8

Page 8
Image 8
Briggs & Stratton 91200, 92200, 94200 warranty Type Of Fuel To Use, Adding Fuel, Fuel Fill