Briggs & Stratton Electric Lawnmower Nut, Nut, Fig, Fig, 25mm, 50mm, 38mm, Screw, Screw, Screw, handle, housing, Control, Aerogrip, Throttle, tighten), Air filter, Do not over, (Please Note:

ASSEMBLYPROCEDURES

Attaching The Remote Air Filter Housing – Aerogrip Handles

2 Stroke Models 4 Stroke Models

Aerogrip handle

	Air filter
	housing	Screw
Aerogrip
handle		Nut
	Nut	Air filter
		housing
Screw
(Please Note:	Screw
Do not over		Throttle
tighten)		Control
	Fig 3.	Fig 4.

2 Stroke Models

Slide the air filter housing onto the upper handle. Position locating lug into hole in handle and secure with screw (see Fig.3). Be careful not to over tighten, as the plastic thread may be damaged.

25mm (Actual size)

4 Stroke Models

1.Firstly secure the throttle control to the right hand side of handle, on the outside

(see Fig. 4) using the 50mm screw and nut pictured here.

2.For models supplied with remote air filter. After attaching the throttle control, secure the air filter housing to the right hand side of handle, on the inside (also fig 4), using the 38mm screw

& nut pictured here.

50mm (Actual size)

38mm (Actual size)

9