ASSEMBLYPROCEDURES

Grasscatcher

Fitting the Grasscatcher

•Stop the engine.

•Raise the rear flap. Locate the grasscatcher tongue over the rear axle and insert the grasscatcher under the rear flap.

•Lower the rear flap to retain the grasscatcher .

STOP the engine before fitting or removing the grasscatcher.

Never use the mower unless the grasscatcher and/or the rear flap are correctly assembled and fitted.

Handle Knobs/Toggles

Mowers will have either knobs or toggles to fix the handles in position. Refer to the instruction below which is specific to your particular model.

•Tighten the handle knobs to secure the upper handle to the lower handle.

•Flip the handle toggles to secure the upper handle to the lower handle.

When folding or unfolding the handles, ensure that the starter switch lead is not caught or stretched (Keystart models only).

6