ASSEMBLYPROCEDURES

GrasscatcherAssembling the Grasscatcher

1 Assemble the adjustable covers 1A or directional covers 1B to the top half of the grasscatcher (If applicable to your model). Check that all of the snap hooks have engaged securely.

2Locate the centre protrusion of the mesh into the centre hole on the inside of the catcher top, ensuring the curved edge of the mesh faces the rear handle. Firmly push the mesh into the top half of the catcher, making sure that the four snap hooks engage securely.

3Loosely locate the rear handle areas of the top and bottom catcher halves then loosely locate the side edges. Check that all eight hooks from the top half are loosely located in the slots on the bottom half then firmly push the two halves together over each snap hook. Check that

5all of the snap hooks have engaged securely.

4Tighten the two screws fitted to the front of the catcher.