Briggs & Stratton MB (18 HP) Steering Lever Adjustment, Neutral Position Adjustment Step

Maintenance Instructions ADJUSTMENTS

Adjustment	Locknut
Slide	(Position)

Locknut

(Pivot Point)

Steering Lever Adjustment

Neutral Position Adjustment - Step 3

1.With the Forward Speed Control (FSC) in neu- tral, the lever should be straight up. Adjust by loosening the jam nuts on the FSC Rod and turn the rod to attain the straight up position. Tighten the jam nuts.

FSC Position

4-7/8"

Steering Adjustment

2.The initial adjustment for neutral is to loosen the jam nuts on each end of the Hydro-Gear Control Rods and turn the rods to achieve a measure- ment of 4-7/8" between the jam nuts. Be sure to tighten jam nuts before making the measure- ment.

Actuator Rod Length Adjustment

52