Step 6
Orient the grill so that the hood hinge holes are at the back of the grill. Align the control panel with the upper set of holes on the legs just below the bottom grill housing. Fasten the control panel using two 6x50mm bolts and nuts.
Step 7
Align the tank hook strap to the legs (on side with tank support bracket). The threaded studs must be facing away from the grill bottom housing. Secure control panel and tank strap using 6x50mm bolts and nuts. Place the tank hook over the threaded studs and secure using two wingnuts.
Step 8
Attach the control valve manifold to the back side of the control panel using the two screws and lock washers provided with the manifold. One screw hole is offset for proper installation. Attach the control knobs by pressing them onto the valve stems.
NOTE: Manifold will have offset holes and can only be installed by aligning holes in manifold with holes in control panel.
19
