view from top
view from bottom
Step 9
Remove the four screws from the bottom mounting brackets on the burner and uncoil the electrode wire. Insert the burner into the grill by placing the venturi through the large hole in the center of the bottom housing. Align the venturi by inserting the control valve orifice into the venturi tubes. Secure the burner to the bottom housing use the four screws removed from the burner mounting brackets.
NOTE: Manifold will have offset holes and can only be installed by aligning holes in manifold with holes in control panel.
Step 10
Insert the burner electrode wire through the hole in the control panel and attach to the end of the igniter. Press the igniter into the hole on the control panel until it snaps in place.
20
