Step 10
Attach side burner to right side of cart frame assembly. Insert two
M6 X 12mm bolts (black) into both right legs halfway. Place side burner over bolts and slide toward back of grill, then tighten securely. Fasten side burner front panel to grill body with one M6 X 12mm bolt (black).
Step 11
Attach hose heat shield using two #8 self-tapping screws.
Step 12
Loosen the two M4 bolts with washers from the bottom of the burner assembly bracket. This will allow the burner to move freely while performing Step 13.
Step 13
Heat Shield
Burner Venturi |
Support Bracket |
Remove two M4 bolts and washers from the side burner valve. Insert the side burner valve assembly through the hole in the side burner front panel, seat the valve nozzle into the burner venturi. Hold in place while you perform Step 14.
Warning: Never use your grill without leak testing all gas connections and hoses. See the section on "Leak Testing" in this manual for proper procedures.
25
Side Burner |
Valve |
Burner Venturi |
Valve |
Nozzle |
