Brinly-Hardy PA-48 BH, PA-40 BH Side Plate Assembly, Bracket Assembly, Tools Required

ASSEMBLY

Figure 1 SIDE PLATE ASSEMBLY

TOOLS REQUIRED:

1/2" Wrench (2)

Slip Joint Pliers

Tape Measure

15/16" Wrench (2)

1a. Assemble Side Plates (5) to Tray (6) as shown.

Pre-assemble the Flat Washers (24) to the Hex Bolts (20). Insert the Bolt and Washer Assembly from the inside of the tray. Secure with Nylon Lock Nuts (32).

	6
	24
32	20
	5

32

IMPORTANT When tightening the bolts, for the PA-48 BH maintain a distance of 48" to 48-1/8" inside to inside of Side Plates (5). For the PA-40 BH maintain a distance of 41" to 41-1/8" inside to inside of Side Plates (5).

(20)	(32)	(24)
Hex Head Bolt, 5/16" x 3/4"	Nylon Lock Nut, 5/16"	Flat Washer, 5/16"
Qty. 8	Qty. 8	Qty. 8

Figure 2 BRACKET ASSEMBLY

2a. Assemble Mount Bracket (31) to the outside	8
of Tow Bars (7) as shown. Pre-assemble the
Flat Washers (24) to the Hex Bolts (8). Insert the
Bolt and Washer Assembly from outside of the
Mount Bracket. Loosely tighten with Nylon Lock
Nuts (32).	24

7

(8)	(32)
Hex Head Bolt, 5/16" x 1"	Nylon Lock Nut, 5/16"
Qty. 4	Qty. 4

31

3224

8

(24)

Flat Washer, 5/16"

Qty. 4

L-1762 Rev. E 6