ASSEMBLY
Figure 3. ATTACH HOSE TO WAND
3a. With pliers clamp one end of the 3/8 inch x 12 foot hose (14) to the Hand Wand (10) using one Hose Clamp (15), as shown.
14
15
Hose Clamp
Qty. 1
1415
15
10
10
Figure 4. ASSEMBLE HOSE |
|
SWIVEL NUTS | 4 |
|
4a. Insert a Hose Barb (23) through the threaded side of each Hose Swivel Nut (24), as shown.
4b. Insert one Vinyl Washer (11) against the back side of the Hose Barb (23) to insure that the fittings do not leak.
4c. Screw the assembled Swivel Nuts (24) to both Dual Tee Valve (9) fittings located on the Pump Assembly (4), as shown.
11 | 9 |
23
24
24
8. |