Britax 70 CS manual Rear-Facing Installation, Loosen the harness

Rear-Facing Installation

1Loosen the harness.

a Lift harness adjuster lever

b Pull both harness straps forward

2Remove the body pillow, unbuckle the harness, and remove the belly pad.

3Pull the head restraint cover up, then pull the seat cover forward while pulling the buckle through to access the rear-facing belt path.

IMPORTANT: Ensure buckle is in inner slot and lying away from the belt path.

4Open the blue lock-off closest to where the vehicle belt will be buckled.

aOpen the locking tab b Open the clamp

5Route the vehicle belt through the rear-facing belt slots, then buckle. Ensure the vehicle belt is not twisted.

6Push down into the middle of the child seating area with moderate force while removing all slack from the bottom (lap) part of the vehicle belt and close the lock-off.

aClose the clamp over the vehicle belt

b Slide your palm or thumb along the locking tab until a click is heard (see page 21)

7Push the child seat down while pulling the top (shoulder) part of the belt between the belt slots to remove any remaining slack

1b

1a

4b

4a

LOCKING

TAB

CLAMP

5

7

36

through the lock-off.